The module owner field can be used to prevent the removal of kernel
modules when there are any device files associated with it opened in
userspace. Hence, modify the API to pass module owner field. For
convenience, module_mhi_driver() macro is used which takes care of
passing the module owner through THIS_MODULE of the module of the
driver and also avoiding the use of specifying the default MHI client
driver register/unregister routines.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200324061050.14845-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to hide some of the differences between v4.0 and v4.1, move
the doorbell management out of the KVM code, and into the GICv4-specific
layer. This allows the calling code to ask for the doorbell when blocking,
and otherwise to leave the doorbell permanently disabled.
This matches the v4.1 code perfectly, and only results in a minor
refactoring of the v4.0 code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-14-maz@kernel.org
Just like for vLPIs, there is some configuration information that cannot
be directly communicated through the normal irqchip API, and we have to
use our good old friend set_vcpu_affinity as a side-band communication
mechanism.
This is used to configure group and priority for a given vSGI.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-13-maz@kernel.org
To implement the get/set_irqchip_state callbacks (limited to the
PENDING state), we have to use a particular set of hacks:
- Reading the pending state is done by using a pair of new redistributor
registers (GICR_VSGIR, GICR_VSGIPENDR), which allow the 16 interrupts
state to be retrieved.
- Setting the pending state is done by generating it as we'd otherwise do
for a guest (writing to GITS_SGIR).
- Clearing the pending state is done by emitting a VSGI command with the
"clear" bit set.
This requires some interesting locking though:
- When talking to the redistributor, we must make sure that the VPE
affinity doesn't change, hence taking the VPE lock.
- At the same time, we must ensure that nobody accesses the same
redistributor's GICR_VSGIR registers for a different VPE, which
would corrupt the reading of the pending bits. We thus take the
per-RD spinlock. Much fun.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-12-maz@kernel.org
The GICv4.1 ITS has yet another new command (VSGI) which allows
a VPE-targeted SGI to be configured (or have its pending state
cleared). Add support for this command and plumb it into the
activate irqdomain callback so that it is ready to be used.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-10-maz@kernel.org
Since GICv4.1 has the capability to inject 16 SGIs into each VPE,
and that I'm keen not to invent too many specific interfaces to
manipulate these interrupts, let's pretend that each of these SGIs
is an actual Linux interrupt.
For that matter, let's introduce a minimal irqchip and irqdomain
setup that will get fleshed up in the following patches.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-9-maz@kernel.org
Since commit "drivers: provide devm_platform_ioremap_resource()",
it was wrap platform_get_resource() and devm_ioremap_resource() as
single helper devm_platform_ioremap_resource(). but now, many drivers
still used platform_get_resource() and devm_ioremap_resource()
together in the kernel tree. The reason can not be replaced is they
still need use the resource variables obtained by platform_get_resource().
so provide this helper.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Link: https://lore.kernel.org/r/20200323160612.17277-2-zhengdejin5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The event inode field is used only for comparison in queue merges and
cannot be dereferenced after handle_event(), because it does not hold a
refcount on the inode.
Replace it with an abstract id to do the same thing.
Link: https://lore.kernel.org/r/20200319151022.31456-8-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently we are supporting block protection only for flash chips with
3 block protection bits (BP0-2) in the SR register.
Enable block protection support for flashes with 4 block protection bits
(BP0-3).
Add a flash_info flag for flashes that describe 4 block protection bits.
Add another flash_info flag for flashes in which BP3 bit is not adjacent
to the BP0-2 bits.
Tested with a n25q512ax3 (BP0-3) and w25q128 (BP0-2).
Signed-off-by: Jungseung Lee <js07.lee@samsung.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Pull RCU changes from Paul E. McKenney:
- Make kfree_rcu() use kfree_bulk() for added performance
- RCU updates
- Callback-overload handling updates
- Tasks-RCU KCSAN and sparse updates
- Locking torture test and RCU torture test updates
- Documentation updates
- Miscellaneous fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
it is sometimes necessary to poll a phy register by phy_read()
function until its value satisfies some condition. introduce
phy_read_poll_timeout() macros that do this.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
it is sometimes necessary to poll a phy register by phy_read_mmd()
function until its value satisfies some condition. introduce
phy_read_mmd_poll_timeout() macros that do this.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
redefined readx_poll_timeout macro by read_poll_timeout to
simplify the code.
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
this macro is an extension of readx_poll_timeout macro. the accessor
function op just supports only one parameter in the readx_poll_timeout
macro, but this macro can supports multiple variable parameters for
it. so functions like phy_read(struct phy_device *phydev, u32 regnum)
and phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum) can
also use this poll timeout core. and also expand it can sleep some time
before read operation.
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unlike NL_SET_ERR_* macros, nl_set_extack_cookie_u64() and
nl_set_extack_cookie_u32() helpers do not check extack argument for null
and neither do their callers, as syzbot recently discovered for
ethnl_parse_header().
Instead of fixing the callers and leaving the trap in place, add check of
null extack to both helpers to make them consistent with NL_SET_ERR_*
macros.
v2: drop incorrect second Fixes tag
Fixes: 2363d73a2f ("ethtool: reject unrecognized request flags")
Reported-by: syzbot+258a9089477493cea67b@syzkaller.appspotmail.com
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
So far PHY drivers have to check whether a downshift occurred to be
able to notify the user. To make life of drivers authors a little bit
easier move the downshift notification to phylib. phy_check_downshift()
compares the highest mutually advertised speed with the actual value
of phydev->speed (typically read by the PHY driver from a
vendor-specific register) to detect a downshift.
v2:
- Add downshift hint to phy_print_status
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The warning was intended to spot complete_all() users from hardirq
context on PREEMPT_RT. The warning as-is will also trigger in interrupt
handlers, which are threaded on PREEMPT_RT, which was not intended.
Use lockdep_assert_RT_in_threaded_ctx() which triggers in non-preemptive
context on PREEMPT_RT.
Fixes: a5c6234e10 ("completion: Use simple wait queues")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200323152019.4qjwluldohuh3by5@linutronix.de
Instead of passing both dentry and path and having to figure out which
one to use, pass data/data_type to simplify the code.
Link: https://lore.kernel.org/r/20200319151022.31456-6-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Factor out fsnotify_name() from fsnotify_dirent(), so it can also serve
link and rename events and use this helper to report all directory entry
change events.
Both helpers return void because no caller checks their return value.
Link: https://lore.kernel.org/r/20200319151022.31456-4-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
uuid_le_gen() is no used anymore, remove it for good.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In some cases we would like to generate a GUID and export it. Though it
would require either casting to internal kernel types or an intermediate
buffer. Instead we may achieve this by supplying a pointer to raw buffer
and make a complimentary API to existing one for UUIDs.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Sometimes we may need to import UUID from or export to the raw buffer,
which is provided outside of kernel and can't be declared as UUID type.
With current API this operation will require an explicit casting
to one of UUID types and length, that is always a constant derived as sizeof
the certain UUID type.
Provide a helpful set of inline helpers to minimize developer's effort
in the cases when raw buffers are involved.
Suggested-by: David Sterba <dsterba@suse.cz>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David Sterba <dsterba@suse.com>
ARCH_SAVE_PAGE_KEYS has been introduced in order to be able to save
and restore s390 specific storage keys into a hibernation image.
With hibernation support removed from s390 there is no point in
keeping the callbacks.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This contains updates to stream and pm handling in the core as well as
updates to Intel drivers for hw sequencing and multi-link.
Details:
Core:
- Updates to stream handling for state machine checks
- Changes to handle potential races for probe/enumeration and init of the bus
- Add no pm version of read and writes
- Support for multiple Slave on same link
- Add read_only_wordlength for simple/reduced ports
Intel:
- Updates to cadence lib to handle hw sequencing
- Support for audio dai calls in intel driver
- Multi link support for cadence lib
Qualcomm:
- Support for get_sdw_stream()
-----BEGIN PGP SIGNATURE-----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=UPKg
-----END PGP SIGNATURE-----
Merge tag 'soundwire-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next
Vinod writes:
soundwire updates for v5.7-rc1
This contains updates to stream and pm handling in the core as well as
updates to Intel drivers for hw sequencing and multi-link.
Details:
Core:
- Updates to stream handling for state machine checks
- Changes to handle potential races for probe/enumeration and init of the bus
- Add no pm version of read and writes
- Support for multiple Slave on same link
- Add read_only_wordlength for simple/reduced ports
Intel:
- Updates to cadence lib to handle hw sequencing
- Support for audio dai calls in intel driver
- Multi link support for cadence lib
Qualcomm:
- Support for get_sdw_stream()
* tag 'soundwire-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (43 commits)
soundwire: qcom: add support for get_sdw_stream()
soundwire: stream: Add read_only_wordlength flag to port properties
soundwire: cadence: clear FIFO to avoid pop noise issue on playback start
soundwire: cadence: multi-link support
soundwire: cadence: commit changes in the exit_reset() sequence
soundwire: cadence: remove automatic command retries
soundwire: cadence: remove PREQ_DELAY assignment
soundwire: cadence: enable NORMAL operation in cdns_init()
soundwire: cadence: reorder MCP_CONFIG settings
soundwire: cadence: make SSP interval programmable
soundwire: cadence: move clock/SSP related inits to dedicated function
soundwire: cadence: merge routines to clear/set bits
soundwire: cadence: mask Slave interrupt before stopping clock
soundwire: cadence: fix a io timeout issue in S3 test
soundwire: cadence: add clock_stop/restart routines
soundwire: cadence: handle error cases with CONFIG_UPDATE
soundwire: cadence: add interface to check clock status
soundwire: cadence: simplifiy cdns_init()
soundwire: cadence: s/update_config/config_update
soundwire: stream: use sdw_write instead of update
...
Make it so that CEPH_MSG_DATA_PAGES data item can own pages,
fixing a bunch of memory leaks for a page vector allocated in
alloc_msg_with_page_vector(). Currently, only watch-notify
messages trigger this allocation, and normally the page vector
is freed either in handle_watch_notify() or by the caller of
ceph_osdc_notify(). But if the message is freed before that
(e.g. if the session faults while reading in the message or
if the notify is stale), we leak the page vector.
This was supposed to be fixed by switching to a message-owned
pagelist, but that never happened.
Fixes: 1907920324 ("libceph: support for sending notifies")
Reported-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Roman Penyaev <rpenyaev@suse.de>
CEPH_OSDMAP_FULL/NEARFULL aren't set since mimic, so we need to consult
per-pool flags as well. Unfortunately the backwards compatibility here
is lacking:
- the change that deprecated OSDMAP_FULL/NEARFULL went into mimic, but
was guarded by require_osd_release >= RELEASE_LUMINOUS
- it was subsequently backported to luminous in v12.2.2, but that makes
no difference to clients that only check OSDMAP_FULL/NEARFULL because
require_osd_release is not client-facing -- it is for OSDs
Since all kernels are affected, the best we can do here is just start
checking both map flags and pool flags and send that to stable.
These checks are best effort, so take osdc->lock and look up pool flags
just once. Remove the FIXME, since filesystem quotas are checked above
and RADOS quotas are reflected in POOL_FLAG_FULL: when the pool reaches
its quota, both POOL_FLAG_FULL and POOL_FLAG_FULL_QUOTA are set.
Cc: stable@vger.kernel.org
Reported-by: Yanhu Cao <gmayyyha@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Sage Weil <sage@redhat.com>
Don't let non-letters inside a literal block without escaping it, as
the toolchain would mis-interpret it:
./include/linux/i2c.h:518: WARNING: Inline strong start-string without end-string.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Add and set a new CP flag CP_RESIZEFS_FLAG during
online resize FS to help fsck fix the metadata mismatch
that may happen due to SPO during resize, where SB
got updated but CP data couldn't be written yet.
fsck errors -
Info: CKPT version = 6ed7bccb
Wrong user_block_count(2233856)
[f2fs_do_mount:3365] Checkpoint is polluted
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Initially, commit fa9ee9c4b9 ("include/linux/err.h: add a function to
cast error-pointers to a return value") from Uwe Kleine-König introduced
PTR_RET in 03/2011. Then, in 07/2013, commit 6e8b8726ad ("PTR_RET is
now PTR_ERR_OR_ZERO") from Rusty Russell renamed PTR_RET to
PTR_ERR_OR_ZERO, and left PTR_RET as deprecated-marked alias.
After six years since the renaming and various repeated cleanups in the
meantime, it is time to finally remove the deprecated PTR_RET for good.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Merge misc fixes from Andrew Morton:
"10 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
x86/mm: split vmalloc_sync_all()
mm, slub: prevent kmalloc_node crashes and memory leaks
mm/mmu_notifier: silence PROVE_RCU_LIST warnings
epoll: fix possible lost wakeup on epoll_ctl() path
mm: do not allow MADV_PAGEOUT for CoW pages
mm, memcg: throttle allocators based on ancestral memory.high
mm, memcg: fix corruption on 64-bit divisor in memory.high throttling
page-flags: fix a crash at SetPageError(THP_SWAP)
mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case
memcg: fix NULL pointer dereference in __mem_cgroup_usage_unregister_event
Commit 3f8fd02b1b ("mm/vmalloc: Sync unmappings in
__purge_vmap_area_lazy()") introduced a call to vmalloc_sync_all() in
the vunmap() code-path. While this change was necessary to maintain
correctness on x86-32-pae kernels, it also adds additional cycles for
architectures that don't need it.
Specifically on x86-64 with CONFIG_VMAP_STACK=y some people reported
severe performance regressions in micro-benchmarks because it now also
calls the x86-64 implementation of vmalloc_sync_all() on vunmap(). But
the vmalloc_sync_all() implementation on x86-64 is only needed for newly
created mappings.
To avoid the unnecessary work on x86-64 and to gain the performance
back, split up vmalloc_sync_all() into two functions:
* vmalloc_sync_mappings(), and
* vmalloc_sync_unmappings()
Most call-sites to vmalloc_sync_all() only care about new mappings being
synchronized. The only exception is the new call-site added in the
above mentioned commit.
Shile Zhang directed us to a report of an 80% regression in reaim
throughput.
Fixes: 3f8fd02b1b ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Borislav Petkov <bp@suse.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [GHES]
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20191009124418.8286-1-joro@8bytes.org
Link: https://lists.01.org/hyperkitty/list/lkp@lists.01.org/thread/4D3JPPHBNOSPFK2KEPC6KGKS6J25AIDB/
Link: http://lkml.kernel.org/r/20191113095530.228959-1-shile.zhang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl51dbQQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpiV3EADJHB2r2hTTEym5u1PbrEEVkjvdL6InU8lD
lFM7m2g6yZUncwm+aSZynHqAFY6Rd5Jk+gmYMuioi3ZxC2rs7jG1AOTpaeJYmhle
lzkjqSLtl+gdPMA9ydivk1UwILFjtZKG1JNc++tnCn3q7+eCkgnWAlq5b7idG2eF
BS0AEZP6Yz1zStTHLbHSB0StY8ovMIw0VaVQvguHLL9EBpbHmrs0cq3tipWkAyPR
2YwnXbxsJySukkwmBKxEWrGUYDze56jqJIqdFsOE0+WtGV+nk7OScPseXAaP4/+G
Vl23VNfryuZcsBUwI9tY1SzCFEXIwdXVGpCAYwQ/kU5WfvFpYaei+fXVNnL4kjR0
PfpA6XnMsZ3DzqgepmUd92sAA56ZtBxuGjqcSYlg/JwjvUHdpaZDkE2WLqkAMeUN
8A7cUw+R6XWQ2/y6ob7QvKiT/ZDR8GrYUl3EdGE3LhB1ZsvLXJDZpWipwQBzuk9R
vJJOkGst38rjsWnb+nfeLh3AsgjF14wo+2vQL4mKs24xKTIvadHsFAZjKLXZ93Wf
Vn58FaPOYIkjBidYLWb3dlO1ZR8S0803gohLkLV6adH8bCNCWxGTOR51DZLomAsb
nAUCEAJaZrOqaQAuJAFNNpS8+/da3AIF4HVd2EdZ1yFXU15y0+zIxtROjKzg+OxO
M3jC/Aet1Q==
=IMcu
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.6-20200320' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two different fixes in here:
- Fix for a potential NULL pointer deref for links with async or
drain marked (Pavel)
- Fix for not properly checking RLIMIT_NOFILE for async punted
operations.
This affects openat/openat2, which were added this cycle, and
accept4. I did a full audit of other cases where we might check
current->signal->rlim[] and found only RLIMIT_FSIZE for buffered
writes and fallocate. That one is fixed and queued for 5.7 and
marked stable"
* tag 'io_uring-5.6-20200320' of git://git.kernel.dk/linux-block:
io_uring: make sure accept honor rlimit nofile
io_uring: make sure openat/openat2 honor rlimit nofile
io_uring: NULL-deref for IOSQE_{ASYNC,DRAIN}
The futex UAPI changed back in commit 76b81e2b0e ("[PATCH] lightweight
robust futexes updates 2"), which landed in v2.6.17: FUTEX_TID_MASK is now
0x3fffffff instead of 0x1fffffff. Update the corresponding comment in
include/linux/threads.h.
Documentation mentions that only the lower 29 bits are available for TID
storage, but as the UAPI header released the bit already via
FUTEX_TID_MASK, this is moot as well. Fix it up.
[ tglx: Fixed up documentation ]
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200302112939.8068-1-jannh@google.com
The header is only used by leds_pwm.c, so move contents to leds_pwm.c
and remove it.
Apply minor changes suggested by checkpatch.
Remove deprecated and unused pwm_id member.
Suggested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Denis Osterland-Heim <Denis.Osterland@diehl.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Continue what commit:
d820ac4c2f ("locking: rename trace_softirq_[enter|exit] => lockdep_softirq_[enter|exit]")
started, rename these to avoid confusing them with tracepoints.
git grep -l "trace_\(soft\|hard\)\(irq_context\|irqs_enabled\)" | while read file;
do
sed -ie 's/trace_\(soft\|hard\)\(irq_context\|irqs_enabled\)/lockdep_\1\2/g' $file;
done
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200320115859.178626842@infradead.org
Continue what commit:
d820ac4c2f ("locking: rename trace_softirq_[enter|exit] => lockdep_softirq_[enter|exit]")
started, rename these to avoid confusing them with tracepoints.
git grep -l "trace_softirqs_\(on\|off\)" | while read file;
do
sed -ie 's/trace_softirqs_\(on\|off\)/lockdep_softirqs_\1/g' $file;
done
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200320115859.119434738@infradead.org
Continue what commit:
d820ac4c2f ("locking: rename trace_softirq_[enter|exit] => lockdep_softirq_[enter|exit]")
started, rename these to avoid confusing them with tracepoints.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200320115859.060481361@infradead.org
