The soc_camera driver is about to be removed, so drop camera
support from this board. Note that the soc_camera driver itself has
long since been deprecated and can't be compiled anymore (it depends
on BROKEN), so camera support on this board has been broken for a long
time (at least since 4.6 when the omap1_camera.c was removed from soc_camera).
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
That was put in place for sparc64, and blackfin also used it for some time;
sparc64 no longer uses those, and blackfin is dead.
As there are no more users, remove preflow handlers.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200703155645.29703-3-valentin.schneider@arm.com
There are a couple of places in net/sched/ that check skb->protocol and act
on the value there. However, in the presence of VLAN tags, the value stored
in skb->protocol can be inconsistent based on whether VLAN acceleration is
enabled. The commit quoted in the Fixes tag below fixed the users of
skb->protocol to use a helper that will always see the VLAN ethertype.
However, most of the callers don't actually handle the VLAN ethertype, but
expect to find the IP header type in the protocol field. This means that
things like changing the ECN field, or parsing diffserv values, stops
working if there's a VLAN tag, or if there are multiple nested VLAN
tags (QinQ).
To fix this, change the helper to take an argument that indicates whether
the caller wants to skip the VLAN tags or not. When skipping VLAN tags, we
make sure to skip all of them, so behaviour is consistent even in QinQ
mode.
To make the helper usable from the ECN code, move it to if_vlan.h instead
of pkt_sched.h.
v3:
- Remove empty lines
- Move vlan variable definitions inside loop in skb_protocol()
- Also use skb_protocol() helper in IP{,6}_ECN_decapsulate() and
bpf_skb_ecn_set_ce()
v2:
- Use eth_type_vlan() helper in skb_protocol()
- Also fix code that reads skb->protocol directly
- Change a couple of 'if/else if' statements to switch constructs to avoid
calling the helper twice
Reported-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com>
Fixes: d8b9605d26 ("net: sched: fix skb->protocol use in case of accelerated vlan path")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=ydSI
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"Fix a pcie_find_root_port() simplification that broke power management
because it didn't handle the edge case of finding the Root Port of a
Root Port itself (Mika Westerberg)""
* tag 'pci-v5.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Make pcie_find_root_port() work for Root Ports
If in the process of creating the underlay QP for an IPoIB interface
the user has set the address and specifically the 1st-3rd bytes
representing the QP number, use the requested QP number when creating
the underlay QP.
For a user to be able to request a QP number on QP creation, the MKEY_BY_NAME
NVCONFIG should be set. As mkey_by_name and qp_by_name are coupled in FW.
This requires driver to query the mkey_by_name max cap during initialization
and set the current cap if it was enabled in FW.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
-----BEGIN PGP SIGNATURE-----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=4lvI
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.8-2020-07-01' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"One fix in here, for a regression in 5.7 where a task is waiting in
the kernel for a condition, but that condition won't become true until
task_work is run. And the task_work can't be run exactly because the
task is waiting in the kernel, so we'll never make any progress.
One example of that is registering an eventfd and queueing io_uring
work, and then the task goes and waits in eventfd read with the
expectation that it'll get woken (and read an event) when the io_uring
request completes. The io_uring request is finished through task_work,
which won't get run while the task is looping in eventfd read"
* tag 'io_uring-5.8-2020-07-01' of git://git.kernel.dk/linux-block:
io_uring: use signal based task_work running
task_work: teach task_work_add() to do signal_wake_up()
USB is a HOST/DEVICE protocol, as per the specification and all
documentation. Fix up terms that are not applicable to make things
match up with the terms used through the rest of the USB stack.
Acked-by: Felipe Balbi <balbi@kernel.org>
Link: https://lore.kernel.org/r/20200701171555.3198836-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extend Intel Stratix10 service layer driver to support new RSU DCMF
versions and max retry parameter.
DCMF = Decision Configuration Management Firmware. The max retry parameter
is the maximum times the images is allowed to reload itself before giving
up and starting RSU failover flow.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Link: https://lore.kernel.org/r/1592231348-31334-3-git-send-email-richard.gong@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct the incorrect flag value for COMMAND_RECONFIG_FLAG_PARTIAL and
increase FPGA reconfig timeout values so that Intel service layer and
FPGA manager drivers can work with all versions of firmware.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Link: https://lore.kernel.org/r/1592231348-31334-2-git-send-email-richard.gong@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Functions are declared 'extern' implicitly by the compiler. There's no
reason to prepend every prototype with it. Remove the 'extern' keyword
from all function declarations in linux/device.h.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200629065008.27620-4-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, most CPUFreq governors are registered at the core_initcall
time when the given governor is the default one, and the module_init
time otherwise.
In preparation for letting users specify the default governor on the
kernel command line, change all of them to be registered at the
core_initcall unconditionally, as it is already the case for the
schedutil and performance governors. This will allow us to assume
that builtin governors have been registered before the built-in
CPUFreq drivers probe.
And since all governors have similar init/exit patterns now, introduce
two new macros, cpufreq_governor_{init,exit}(), to factorize the code.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On some SPI controllers (like spi-geni-qcom) setting the chip select
is a heavy operation. For instance on spi-geni-qcom, with the current
code, is was measured as taking upwards of 20 us. Even on SPI
controllers that aren't as heavy, setting the chip select is at least
something like a MMIO operation over some peripheral bus which isn't
as fast as a RAM access.
While it would be good to find ways to mitigate problems like this in
the drivers for those SPI controllers, it can also be noted that the
SPI framework could also help out. Specifically, in some situations,
we can see the SPI framework calling the driver's set_cs() with the
same parameter several times in a row. This is specifically observed
when looking at the way the Chrome OS EC SPI driver (cros_ec_spi)
works but other drivers likely trip it to some extent.
Let's solve this by caching the chip select state in the core and only
calling into the controller if there was a change. We check not only
the "enable" state but also the chip select mode (active high or
active low) since controllers may care about both the mode and the
enable flag in their callback.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200629164103.1.Ied8e8ad8bbb2df7f947e3bc5ea1c315e041785a2@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Added 14 years ago in commit 73241ccca0 ("[PATCH] Collect more inode
information during syscall processing.") but never used however
needlessly churned no less than 10 times since. Remove the unused
__audit_inode* stubs in the !CONFIG_AUDITSYSCALL case.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
A common pattern for using plain DEVICE_ATTR() instead of
DEVICE_ATTR_RO() and DEVICE_ATTR_RW() is for attributes that want to
limit read to only root. I.e. many users of DEVICE_ATTR() are
specifying 0400 or 0600 for permissions.
Given the expectation that CAP_SYS_ADMIN is needed to access these
sensitive attributes and an explicit helper with the _ADMIN_ identifier
for DEVICE_ATTR_ADMIN_{RO,RW}.
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/159312906372.1850128.11611897078988158727.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make SCMI base protocol register with the notification core.
Link: https://lore.kernel.org/r/20200701155348.52864-10-cristian.marussi@arm.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Make SCMI power protocol register with the notification core.
Link: https://lore.kernel.org/r/20200701155348.52864-6-cristian.marussi@arm.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add the core SCMI notifications callbacks-registration support: allow
users to register their own callbacks against the desired events.
Whenever a registration request is issued against a still non existent
event, mark such request as pending for later processing, in order to
account for possible late initializations of SCMI Protocols associated
to loadable drivers.
Link: https://lore.kernel.org/r/20200701155348.52864-3-cristian.marussi@arm.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add the core SCMI notifications protocol-registration support: allow
protocols to register their own set of supported events, during their
initialization phase. Notification core can track multiple platform
instances by their handles.
Link: https://lore.kernel.org/r/20200701155348.52864-2-cristian.marussi@arm.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Introduce helper bpf_get_task_stack(), which dumps stack trace of given
task. This is different to bpf_get_stack(), which gets stack track of
current task. One potential use case of bpf_get_task_stack() is to call
it from bpf_iter__task and dump all /proc/<pid>/stack to a seq_file.
bpf_get_task_stack() uses stack_trace_save_tsk() instead of
get_perf_callchain() for kernel stack. The benefit of this choice is that
stack_trace_save_tsk() doesn't require changes in arch/. The downside of
using stack_trace_save_tsk() is that stack_trace_save_tsk() dumps the
stack trace to unsigned long array. For 32-bit systems, we need to
translate it to u64 array.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200630062846.664389-3-songliubraving@fb.com
Sanitize and expose get/put_callchain_entry(). This would be used by bpf
stack map.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200630062846.664389-2-songliubraving@fb.com
Instead just iterate over the inodes for the block device superblock.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just use bd_disk->queue instead.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can trivially calculate the block size from the inodes i_blkbits
variable. Use that instead of keeping two redundant copies of the
information in slightly different formats.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that submit_bio_noacct has a decent blk-mq fast path there is no
more need for this bypass.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
generic_make_request has always been very confusingly misnamed, so rename
it to submit_bio_noacct to make it clear that it is submit_bio minus
accounting and a few checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The make_request_fn is a little weird in that it sits directly in
struct request_queue instead of an operation vector. Replace it with
a block_device_operations method called submit_bio (which describes much
better what it does). Also remove the request_queue argument to it, as
the queue can be derived pretty trivially from the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The queue can be trivially derived from the bio, so pass one less
argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This data structure can be delivered to the mux drivers when
Enter_USB Message is used exactly the same way as the
Alternate Mode specific data structures are delivered to the
mux drivers when Enter Mode Messages are used.
The Enter_USB data structure shall have all details related
to the Enter_USB Message, most importantly the Enter_USB
Date Object that was used.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200701115618.22482-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix kernel-doc warnings in <linux/usb.h>:
../include/linux/usb.h:713: warning: Function parameter or member 'use_generic_driver' not described in 'usb_device'
../include/linux/usb.h:1253: warning: Function parameter or member 'match' not described in 'usb_device_driver'
../include/linux/usb.h:1253: warning: Function parameter or member 'id_table' not described in 'usb_device_driver'
Also drop an extra blank line and fix indentation.
Fixes: 77419aa403 ("USB: Fallback to generic driver when specific driver fails")
Fixes: 88b7381a93 ("USB: Select better matching USB drivers when available")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/7014bab2-268c-69f6-7ef5-57fbd45c8b08@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The only way the platform data for the SKY81452 ever gets populated
is through the device tree.
The MFD device is bothered with this for no reason at all. Just
allocate the platform data in the driver and be happy.
Cc: Gyungoh Yoo <jack.yoo@skyworksinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The SKY81452 backlight driver just obtains a GPIO (named "gpios"
in the device tree) drives it high and leaves it high until the
driver is removed.
Switch to use GPIO descriptors for this, simple and
straight-forward.
Cc: Gyungoh Yoo <jack.yoo@skyworksinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
In some cases it's very useful to silently check whether port node exists
at all in a device-tree before proceeding with parsing the graph. The DRM
bridges code is one example of such case where absence of a graph in a
device-tree is a legit condition.
This patch adds of_graph_is_present() which returns true if given
device-tree node contains OF graph port.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701074232.13632-2-digetx@gmail.com
Implement a managed variant of of_mdiobus_register(). We need to make
mdio_devres into its own module because otherwise we'd hit circular
sumbol dependencies between phylib and of_mdio.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'extern' keyword in headers doesn't have any benefit. Remove them
all from the of_mdio.h header.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently have two managed helpers for mdiobus - devm_mdiobus_alloc()
and devm_mdiobus_register(). The idea behind devres is that the release
callback releases whatever resource the devm function allocates. In the
mdiobus case however there's no devres associated with the device by
devm_mdiobus_register(). Instead the release callback for
devm_mdiobus_alloc(): _devm_mdiobus_free() unregisters the device if
it is marked as managed.
This all seems wrong. The managed structure shouldn't need to know or
care about whether it's managed or not - and this is the case now for
struct mii_bus. The devres wrapper should be opaque to the managed
resource.
This changeset makes devm_mdiobus_alloc() and devm_mdiobus_register()
conform to common devres standards: devm_mdiobus_alloc() allocates a
devres structure and registers a callback that will call mdiobus_free().
__devm_mdiobus_register() allocated another devres and registers a
callback that will unregister the bus.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Functions should only be static inline if they're very short. This
devres helper is already over 10 lines and it will grow soon as we'll
be improving upon its approach. Pull it into mdio_devres.c.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set the actual copyright holder and years in all qed source files.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.
Remove all the boilerplates in the existing code and replace it with the
correct SPDX tag.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.
Correct already existing but wrong SPDX tags to match the actual
license.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
