The comment for ntb_dev_ops and ntb_dev incorrectly referred to
ntb_ctx_ops and ntb_device.
Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Texas Instrument's System Control Interface (TI-SCI) Message Protocol
is used in Texas Instrument's System on Chip (SoC) such as those
in K3 family AM654 SoC to communicate between various compute
processors with a central system controller entity.
The system controller provides various services including the control
of other compute processors within the SoC. Extend the TI-SCI protocol
support to add various TI-SCI commands to invoke services associated
with power and reset control, and boot vector management of the
various compute processors from the Linux kernel.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Configuration of NAVSS resource, like rings, UDMAP channels, flows
and PSI-L thread management need to be done via TISCI.
Add the needed structures and functions for NAVSS resource configuration of
the following:
Rings from Ring Accelerator
PSI-L thread management
UDMAP tchan, rchan and rflow configuration.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
This fixes the warnings:
* include/linux/gpio.h:254:11: warning: 'struct pinctrl_dev' declared
inside parameter list will not be visible outside of this definition
or declaration
* include/linux/gpio/driver.h:602:11: warning: 'struct pinctrl_dev'
declared inside parameter list will not be visible outside of this
definition or declaration
Fixes: 78b99577b3 ("pinctrl: remove unused pin_is_valid()")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Enrico Weigelt <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Adding delays to TCP flows is crucial for studying behavior
of TCP stacks, including congestion control modules.
Linux offers netem module, but it has unpractical constraints :
- Need root access to change qdisc
- Hard to setup on egress if combined with non trivial qdisc like FQ
- Single delay for all flows.
EDT (Earliest Departure Time) adoption in TCP stack allows us
to enable a per socket delay at a very small cost.
Networking tools can now establish thousands of flows, each of them
with a different delay, simulating real world conditions.
This requires FQ packet scheduler or a EDT-enabled NIC.
This patchs adds TCP_TX_DELAY socket option, to set a delay in
usec units.
unsigned int tx_delay = 10000; /* 10 msec */
setsockopt(fd, SOL_TCP, TCP_TX_DELAY, &tx_delay, sizeof(tx_delay));
Note that FQ packet scheduler limits might need some tweaking :
man tc-fq
PARAMETERS
limit
Hard limit on the real queue size. When this limit is
reached, new packets are dropped. If the value is lowered,
packets are dropped so that the new limit is met. Default
is 10000 packets.
flow_limit
Hard limit on the maximum number of packets queued per
flow. Default value is 100.
Use of TCP_TX_DELAY option will increase number of skbs in FQ qdisc,
so packets would be dropped if any of the previous limit is hit.
Use of a jump label makes this support runtime-free, for hosts
never using the option.
Also note that TSQ (TCP Small Queues) limits are slightly changed
with this patch : we need to account that skbs artificially delayed
wont stop us providind more skbs to feed the pipe (netem uses
skb_orphan_partial() for this purpose, but FQ can not use this trick)
Because of that, using big delays might very well trigger
old bugs in TSO auto defer logic and/or sndbuf limited detection.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These are actually fbcon ioctls which just happen to be exposed
through /dev/fb*. They completely ignore which fb_info they're called
on, and I think the userspace tool even hardcodes to /dev/fb0.
Hence just forward the entire thing to fbcon.c wholesale.
Note that this patch drops the fb_lock/unlock on the set side. Since
the ioctl can operate on any fb (as passed in through
con2fb.framebuffer) this is bogus. Also note that fbcon.c in general
never calls fb_lock on anything, so this has been badly broken
already.
With this the last user of the fbcon notifier callback is gone, and we
can garbage collect that too.
v2: add missing uaccess.h include (alpha fails to compile otherwise),
reported by kbuild.
v3: Remember to also drop the #defines (Maarten)
v4: Add the static inline to dummy functions.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Yisheng Xie <ysxie@foxmail.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Peter Rosin <peda@axentia.se>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-31-daniel.vetter@ffwll.ch
While at it, clean up the interface a bit and push the console locking
into fbcon.c.
v2: Remove now outdated comment (Lukas).
v3: Forgot to add static inline to the dummy function.
Acked-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Yisheng Xie <ysxie@foxmail.com>
Cc: linux-fbdev@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-30-daniel.vetter@ffwll.ch
Create a new wrapper function for this, feels like there's some
refactoring room here between the two modes.
v2: backlight notifier is also interested in the mode change event,
it calls lcd->set_mode, of which there are 3 implementations. Thanks
to Maarten for spotting this. So we keep that. We can ditch the differentiation
between mode change and all mode changes (because backlight notifier
doesn't care), and we can drop the FBINFO_MISC_USEREVENT stuff too,
because that's just to prevent recursion between fbmem.c and fbcon.c.
While at it flatten the control flow a bit.
v3: Need to add a static inline to the dummy function.
v4: Add missing #include <fbcon.h> to sh_mob (Sam).
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Yisheng Xie <ysxie@foxmail.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Peter Rosin <peda@axentia.se>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: linux-fbdev@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-29-daniel.vetter@ffwll.ch
This reverts commit 994efacdf9.
The justification is that if hw blanking fails (i.e. fbops->fb_blank)
fails, then we still want to shut down the backlight. Which is exactly
_not_ what fb_blank() does and so rather inconsistent if we end up
with different behaviour between fbcon and direct fbdev usage. Given
that the entire notifier maze is getting in the way anyway I figured
it's simplest to revert this not well justified commit.
v2: Add static inline to the dummy version.
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Yisheng Xie <ysxie@foxmail.com>
Cc: linux-fbdev@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-25-daniel.vetter@ffwll.ch
I'm not entirely clear on what new_modelist actually does, it seems
exclusively for a sysfs interface. Which in the end does amount to a
normal fb_set_par to check the mode, but then takes a different path
in both fbmem.c and fbcon.c.
I have no idea why these 2 paths are different, but then I also don't
really want to find out. So just do the simple conversion to a direct
function call.
v2: static inline for the dummy versions, I forgot.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Rosin <peda@axentia.se>
Cc: Yisheng Xie <ysxie@foxmail.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: linux-fbdev@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-23-daniel.vetter@ffwll.ch
Except for driver bugs (which we'll catch with a WARN_ON) this is only
to report failures of the new driver taking over the console. There's
nothing the outgoing driver can do about that, and no one ever
bothered to actually look at these return values. So remove them all.
v2: fixup unregister_framebuffer in savagefb, fbtft, ivtvfb, and neofb
drivers, reported by kbuild.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Peter Rosin <peda@axentia.se>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: linux-fbdev@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-19-daniel.vetter@ffwll.ch
Also remove the error return value. That's all errors for either
driver bugs (trying to unbind something that isn't bound), or errors
of the new driver that will take over.
There's nothing the outgoing driver can do about this anyway, so
switch over to void.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Kees Cook <keescook@chromium.org>
Cc: Konstantin Khorenko <khorenko@virtuozzo.com>
Cc: Yisheng Xie <ysxie@foxmail.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: linux-fbdev@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-18-daniel.vetter@ffwll.ch
Ever since
commit c47747fde9
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed May 11 14:58:34 2011 -0700
fbmem: make read/write/ioctl use the frame buffer at open time
fbdev has gained proper refcounting for the fbinfo attached to any
open files, which means that the backing driver (stored in
fb_info->fbops) cannot untimely disappear anymore.
The only thing that can happen is that the entire device just outright
disappears and gets unregistered, but file_fb_info does check for
that. Except that it's racy - it only checks once at the start of a
file_ops, there's no guarantee that the underlying fbdev won't
untimely disappear. Aside: A proper way to fix that race is probably
to replicate the srcu trickery we've rolled out in drm.
But given that this race has existed since forever it's probably not
one we need to fix right away. do_unregister_framebuffer also nowhere
clears fb_info->fbops, hence the check in lock_fb_info can't possible
catch a disappearing fbdev later on.
Long story short: Ever since the above commit the fb_info->fbops
checks have essentially become dead code. Remove this all.
Aside from the file_ops callbacks, and stuff called from there
there's only register/unregister code left. If that goes wrong a driver
managed to register/unregister a device instance twice or in the wrong
order. That's just a driver bug.
v2:
- fb_mmap had an open-coded version of the fbinfo->fops check, because
it doesn't need the fbinfo->lock. Delete that too.
- Use the wrapper function in fb_open/release now, since no difference
anymore.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Yisheng Xie <ysxie@foxmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Peter Rosin <peda@axentia.se>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: linux-fbdev@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-17-daniel.vetter@ffwll.ch
With
commit 6104c37094
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Aug 1 17:32:07 2017 +0200
fbcon: Make fbcon a built-time depency for fbdev
we have a static dependency between fbcon and fbdev, and we can
replace the indirection through the notifier chain with a function
call.
v2: Sam Ravnborg noticed that mach-pxa/am200epd.c has a notifier too,
and listens to this.
...
Looking at the code it seems to wait for some fb to show up, so that
it can get the framebuffer base address from the fb_info struct. I
suspect his is some firmware fbdev. Then it uses that information to
let the real fbdev driver (metronomefb.c by the looks) get at the
framebuffer memory.
This doesn't looke like it's easy to fix (except by deleting the
entire thing, seems untouched since 2008, we might be able to get away
with that), so let's just stuff a few #ifdef into fb.h and fbmem.c and
cry over them for a bit.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Yisheng Xie <ysxie@foxmail.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Konstantin Khorenko <khorenko@virtuozzo.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Steve Sakoman <sakoman@gmail.com>
Cc: Steve Sakoman <steve@sakoman.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-11-daniel.vetter@ffwll.ch
I honestly have no idea what the subtle differences between
con_is_visible, con_is_fg (internal to vt.c) and con_is_bound are. But
it looks like both vc->vc_display_fg and con_driver_map are protected
by the console_lock, so probably better if we hold that when checking
this.
To do that I had to deinline the con_is_visible function.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Martin Hostettler <textshell@uchuujin.de>
Cc: Adam Borowski <kilobyte@angband.pl>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-5-daniel.vetter@ffwll.ch
-----BEGIN PGP SIGNATURE-----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=3A2t
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-cros-v5.3' into chrome-platform/for-next
Immutable branch between MFD and chrome-platform for driver changes to
allow picking patches that depends on the cros_ec_commands.h file
update.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
This converts the Wolfson Micro WM831x DCDC converter to use
a GPIO descriptor for the GPIO driving the DVS pin.
There is just one (non-DT) machine in the kernel using this, and
that is the Wolfson Micro (now Cirrus) Cragganmore 6410 so we
patch this board to pass a descriptor table and fix up the driver
accordingly.
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Richard Fitzgerald <rf@opensource.cirrus.com>
Cc: patches@opensource.cirrus.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The FMC subsystem was created in 2012 with the ambition to
drive development of drivers for this hardware upstream.
The current implementation has architectural flaws and would
need to be revamped using real hardware to something that can
reuse existing kernel abstractions in the subsystems for e.g.
I2C, FPGA and GPIO.
We have concluded that for the mainline kernel it will be
better to delete the subsystem and start over with a clean
slate when/if an active maintainer steps up.
For details see:
https://lkml.org/lkml/2018/10/29/534
Suggested-by: Federico Vaga <federico.vaga@cern.ch>
Cc: Pat Riehecky <riehecky@fnal.gov>
Acked-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Federico Vaga <federico.vaga@cern.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Future SoCs are going to have more than 255 device clocks in certain cases,
and thus the API must be extended to support this. The support is done in
backwards compatible extension, in which the new u32 clock identifier
fields are only used if the existing u8 size clock identifier is set as
255. In all the other cases, the existing u8 clock identifier is used. As
the size of the messages sent / received is not verified for existing
devices / old firmware, increasing the size of the messages from the end
is also fine. Due to this reason, depending on ABI version isn't necessary
either.
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
In preparation for dealing with scales within the SCMI HWMON driver,
fetch and store the sensor unit scale into the scmi_sensor_info
structure. In order to simplify computations for upper layer, take care
of sign extending the scale to a full 8-bit signed value.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
[sudeep.holla: update bitfield values as per specification]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Exposing architecture specific per process information is useful for
various reasons. An example is the AVX512 usage on x86 which is important
for task placement for power/performance optimizations.
Adding this information to the existing /prcc/pid/status file would be the
obvious choise, but it has been agreed on that a explicit arch_status file
is better in separating the generic and architecture specific information.
[ tglx: Massage changelog ]
Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: peterz@infradead.org
Cc: hpa@zytor.com
Cc: ak@linux.intel.com
Cc: tim.c.chen@linux.intel.com
Cc: dave.hansen@intel.com
Cc: arjan@linux.intel.com
Cc: adobriyan@gmail.com
Cc: aubrey.li@intel.com
Cc: linux-api@vger.kernel.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Linux API <linux-api@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190606012236.9391-1-aubrey.li@linux.intel.com
We must never alter the register tables; these are read-only as far
as the driver is concerned. Constify these tables.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Introduce a new type for reserved region. This corresponds
to directly mapped regions which are known to be relaxable
in some specific conditions, such as device assignment use
case. Well known examples are those used by USB controllers
providing PS/2 keyboard emulation for pre-boot BIOS and
early BOOT or RMRRs associated to IGD working in legacy mode.
Since commit c875d2c1b8 ("iommu/vt-d: Exclude devices using RMRRs
from IOMMU API domains") and commit 18436afdc1 ("iommu/vt-d: Allow
RMRR on graphics devices too"), those regions are currently
considered "safe" with respect to device assignment use case
which requires a non direct mapping at IOMMU physical level
(RAM GPA -> HPA mapping).
Those RMRRs currently exist and sometimes the device is
attempting to access it but this has not been considered
an issue until now.
However at the moment, iommu_get_group_resv_regions() is
not able to make any difference between directly mapped
regions: those which must be absolutely enforced and those
like above ones which are known as relaxable.
This is a blocker for reporting severe conflicts between
non relaxable RMRRs (like MSI doorbells) and guest GPA space.
With this new reserved region type we will be able to use
iommu_get_group_resv_regions() to enumerate the IOVA space
that is usable through the IOMMU API without introducing
regressions with respect to existing device assignment
use cases (USB and IGD).
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some IOMMU hardware features, for example PCI PRI and Arm SMMU Stall,
enable recoverable I/O page faults. Allow IOMMU drivers to report PRI Page
Requests and Stall events through the new fault reporting API. The
consumer of the fault can be either an I/O page fault handler in the host,
or a guest OS.
Once handled, the fault must be completed by sending a page response back
to the IOMMU. Add an iommu_page_response() function to complete a page
fault.
There are two ways to extend the userspace API:
* Add a field to iommu_page_response and a flag to
iommu_page_response::flags describing the validity of this field.
* Introduce a new iommu_page_response_X structure with a different version
number. The kernel must then support both versions.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Traditionally, device specific faults are detected and handled within
their own device drivers. When IOMMU is enabled, faults such as DMA
related transactions are detected by IOMMU. There is no generic
reporting mechanism to report faults back to the in-kernel device
driver or the guest OS in case of assigned devices.
This patch introduces a registration API for device specific fault
handlers. This differs from the existing iommu_set_fault_handler/
report_iommu_fault infrastructures in several ways:
- it allows to report more sophisticated fault events (both
unrecoverable faults and page request faults) due to the nature
of the iommu_fault struct
- it is device specific and not domain specific.
The current iommu_report_device_fault() implementation only handles
the "shoot and forget" unrecoverable fault case. Handling of page
request faults or stalled faults will come later.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Device faults detected by IOMMU can be reported outside the IOMMU
subsystem for further processing. This patch introduces
a generic device fault data structure.
The fault can be either an unrecoverable fault or a page request,
also referred to as a recoverable fault.
We only care about non internal faults that are likely to be reported
to an external subsystem.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Liu, Yi L <yi.l.liu@linux.intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
DMA faults can be detected by IOMMU at device level. Adding a pointer
to struct device allows IOMMU subsystem to report relevant faults
back to the device driver for further handling.
For direct assigned device (or user space drivers), guest OS holds
responsibility to handle and respond per device IOMMU fault.
Therefore we need fault reporting mechanism to propagate faults beyond
IOMMU subsystem.
There are two other IOMMU data pointers under struct device today, here
we introduce iommu_param as a parent pointer such that all device IOMMU
data can be consolidated here. The idea was suggested here by Greg KH
and Joerg. The name iommu_param is chosen here since iommu_data has been
used.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lkml.org/lkml/2017/10/6/81
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This function was used by pin_request() to pointlessly double-check
the pin validity, and it was the only user ever.
Since commit d2f6a1c6fb ("pinctrl: remove double pin validity
check."), no one has ever used it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for Amazon Graviton custom variant of GICv2m, where the message
is encoded using the MSI message address, as opposed to standard
GICv2m, where the SPI number is encoded in the MSI message data.
In addition, the Graviton flavor of GICv2m is used along GICv3 (and not
GICv2).
Co-developed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Zeev Zilberman <zeev@amazon.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Currently, the AF_XDP code uses a separate map in order to
determine if an xsk is bound to a queue. Instead of doing this,
have bpf_map_lookup_elem() return a xdp_sock.
Rearrange some xdp_sock members to eliminate structure holes.
Remove selftest - will be added back in later patch.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
FMC has its own GPIO handling, the inclusion of <linux/gpio.h>
is only to reuse some flags that we can just as well provide
using local defines.
Cc: Federico Vaga <federico.vaga@cern.ch>
Cc: Pat Riehecky <riehecky@fnal.gov>
Acked-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
So long as a struct hmm pointer exists, so should the struct mm it is
linked too. Hold the mmgrab() as soon as a hmm is created, and mmdrop() it
once the hmm refcount goes to zero.
Since mmdrop() (ie a 0 kref on struct mm) is now impossible with a !NULL
mm->hmm delete the hmm_hmm_destroy().
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Philip Yang <Philip.Yang@amd.com>
Ralph observes that hmm_range_register() can only be called by a driver
while a mirror is registered. Make this clear in the API by passing in the
mirror structure as a parameter.
This also simplifies understanding the lifetime model for struct hmm, as
the hmm pointer must be valid as part of a registered mirror so all we
need in hmm_register_range() is a simple kref_get.
Suggested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Philip Yang <Philip.Yang@amd.com>
Some older interconnect target modules need module internal clock
toggling quirks to reset properly. We've been doing this in the
platform code earlier, but need to be able to it directly in the
ti-sysc driver when we no longer rely on on the platform code.
Let's add reset handling for 1-wire, i2c and watchdog. Later on
we can add more modules like msdi and dss as they get tested.
For dra7 pcie, we should be able to just use the rstctrl reset
driver when available.
Signed-off-by: Tony Lindgren <tony@atomide.com>
It's better to use my kadlec@netfilter.org email address in
the source code. I might not be able to use
kadlec@blackhole.kfki.hu in the future.
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
There's some discussion on how to do this the best, and Tejun prefers
that BFQ just create the file itself instead of having cgroups support
a symlink feature.
Hence revert commit 54b7b868e8 and 19e9da9e86 for 5.2, and this
can be done properly for 5.3.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add commands for test and management.
Add command space for future development.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add API to store SKU, Cros board information in EC flash memory.
Add API to store security data in EC.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add command to retrieve signature of image stored in the RW memory
slot(s).
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add API to control touchpad presented by Embedded Controller.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Allow EC to talk to other ECs that are not presented to the host.
Neeed when EC are present in detachable keyboard.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Prevent direct i2c access to device behind EC when not in development mode.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add support for controlling hibernation of the Embedded Controller.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
