Rather than writing all bits of SPU_ADV_REG on modeset, only write
what we need to change, and initialise the register in the variant
initialisation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Update debug to use KMS level, and print the mode using the standard
format for mode lines, but print the adjusted CRTC parameters as
that's what we will be programming for.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
For atomic modeset, we need to set the sync signal polarities from the
CRTC state structure rather than the legacy mode structure stored in
CRTC. In any case, we should update this from our mode_set_nofb()
method, rather than the commit() method. Move it there, and ensure
that armada_drm_crtc_update() will not overwrite these bits.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Push the interlaced frame calculation down into armada_drm_plane_calc()
which needs to apply the same correction for both the overlay and
primary planes.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Provide the framebuffer pitches from armada_drm_plane_calc_addrs() as
well as the base addresses for each plane. Since this is now about
more than just addresses, rename to armada_drm_plane_calc().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
armada_drm_plane_calc_addrs() gets all its information from the plane
state, so it makes sense to pass the plane state pointer down into this
function, rather than extracting the information in identical ways,
sometimes a couple of layers up.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the armada_drm_mode_config_funcs to armada_drv.c, since this now
has less to do with FBs than it does with general mode configuration.
In doing so, we need to make armada_fb_create() visible to armada_drv.c,
which reveals a function name clash with armada_fbdev.c. Rename the
version in armada_fbdev.c.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use the DRM standard plane properties for specifying the YUV
colour encoding parameter. Our colour range is fixed at limited
range.
Since we are transitioning to atomic modeset, we need to explicitly
add handling of these properties to our atomic_set_property() method,
but once the transition is complete, these will be removed.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Remove the unused CRTC colourspace properties - userspace does not make
use of these. In any case, these are not a property of the CRTC, since
they demonstrably only affect the video (overlay) plane, irrespective
of the format of the graphics (primary) plane.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the overlay plane colorkey properties into the plane state,
keeping the existing driver behaviour to avoid breaking userspace.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the contrast, brightness, and saturation properties to the overlay
plane state structure, and call our overlay commit function to update
the hardware via the planes atomic_update() method.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Rather than tracking the register state, we can now check the previous
state and decide which registers need updating from that since the old
plane state indicates the previous state which was programmed into the
hardware.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Now that we have the CRTC using the atomic modeset transitional helper,
there is no need to build a temporary crtc state anymore - we can use
the CRTC atomic state directly.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The overlay plane support updates asynchronously to the request, but the
drm_plane_helper_update() transitional helper waits for a vblank event
before releasing the framebuffer. Using the transitional helper would
make the call block, which would introduce a performance regression.
Convert the overlay plane update to use the atomic state structures and
methods for the plane, but implement our own legacy update method
rather than the transitional helper.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
page_flip requests happen asynchronously, so we can't wait on the
vblank event before returning to userspace, as the transitional plane
update helper would do. Craft our own implementation that keeps the
asynchronous behaviour of this request, while making use of the atomic
infrastructure for the primary plane update.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Convert the primary plane as a whole to use its atomic state and the
transitional helpers. The CRTC is also switched to use the transitional
helpers for mode_set() and mode_set_base().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reset the atomic state of any converted components during driver
initialisation to ensure that we have the atomic state initialised for
any component converted to atomic modeset.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
armada_drm_gra_plane_regs() is now only ever called from within
armada_drm_primary_update_state(), so merge it into this function.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use the core of the update_plane method to configure the primary plane
within mode_set() rather than duplicating this code. This moves us
closer to the same code structure that the atomic modeset transitional
helpers will use.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the mode set vblank handling and controller enable/disable to the
prepare() and commit() callbacks. This will be needed when we move to
mode_set_nofb() as we should not enable the controller without the
plane coordinates and location having been properly updated.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
drm_mode_page_flip_ioctl() already takes care of checking the
framebuffer format, and also assigns primary->fb after a successful
call to this handler. These are both redundant, and can be removed.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use new return type vm_fault_t for fault handler in struct
vm_operations_struct. For now, this is just documenting that the
function returns a VM_FAULT value rather than an errno. Once all
instances are converted, vm_fault_t will become a distinct type.
commit 1c8f422059 ("mm: change return type to vm_fault_t")
Previously vm_insert_pfn() returns err which driver mapped into
VM_FAULT_* type. The new function vmf_insert_pfn() will replace this
inefficiency by returning VM_FAULT_* type.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
On ARMv5 and above, it is beneficial to use compiler built-ins such as
__builtin_ffs() and __builtin_ctzl() to implement ffs(), __ffs(), fls()
and __fls(). The compiler does inline the clz instruction and even the
rbit instruction when available, or provide a constant value when
possible. On ARMv4 the compiler calls out to helper functions for those
built-ins so it is best to keep the open coded versions in that case.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
ARMv8R adds support for virtualisation extension (with some deviation
from v8A). With this patch hyp-unaware boot code can offload to kernel
setting up HYP stuff in a sane state.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
ARMv8R adds support for VBAR and updates ID_PFR1 with the new filed
Sec_frac (bits [23:20]):
Security fractional field. When the Security field is 0000, determines
the support for features from the ARMv7 Security Extensions. Permitted
values are:
0000 No features from the ARMv7 Security Extensions are implemented.
This value is not supported in ARMv8 if ID_PFR1 bits [7:4] are zero.
0001 The implementation includes the VBAR, and the TCR.PD0 and TCR.PD1
bits.
0010 As for 0001, plus the ability to access Secure or Non-secure
physical memory is supported.
All other values are reserved.
This field is only valid when ID_PFR1[7:4] == 0, otherwise it holds
the value 0000.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Since commit 799c434154 ("kbuild: thin archives make default for
all archs"), $(AR) is used instead of $(LD) to combine object files.
The following code in arch/arm/vfp/Makefile:
LDFLAGS +=--no-warn-mismatch
... is no longer used.
Also, arch/arm/Makefile already guards arch/arm/vfp/ by a boolean
symbol, CONFIG_VFP, like this:
core-$(CONFIG_VFP) += arch/arm/vfp/
So, $(CONFIG_VFP) is always evaluated to y in arch/arm/vfp/Makefile.
There is no point to use pseudo object, vfp.o, which never becomes
a module. Add all objects to obj-y directly.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
When building the kernel as Thumb-2 with binutils 2.29 or newer, if the
assembler has seen the .type directive (via ENDPROC()) for a symbol, it
automatically handles the setting of the lowest bit when the symbol is
used with ADR. The badr macro on the other hand handles this lowest bit
manually. This leads to a jump to a wrong address in the wrong state
in the syscall return path:
Internal error: Oops - undefined instruction: 0 [#2] SMP THUMB2
Modules linked in:
CPU: 0 PID: 652 Comm: modprobe Tainted: G D 4.18.0-rc3+ #8
PC is at ret_fast_syscall+0x4/0x62
LR is at sys_brk+0x109/0x128
pc : [<80101004>] lr : [<801c8a35>] psr: 60000013
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 50c5387d Table: 9e82006a DAC: 00000051
Process modprobe (pid: 652, stack limit = 0x(ptrval))
80101000 <ret_fast_syscall>:
80101000: b672 cpsid i
80101002: f8d9 2008 ldr.w r2, [r9, #8]
80101006: f1b2 4ffe cmp.w r2, #2130706432 ; 0x7f000000
80101184 <local_restart>:
80101184: f8d9 a000 ldr.w sl, [r9]
80101188: e92d 0030 stmdb sp!, {r4, r5}
8010118c: f01a 0ff0 tst.w sl, #240 ; 0xf0
80101190: d117 bne.n 801011c2 <__sys_trace>
80101192: 46ba mov sl, r7
80101194: f5ba 7fc8 cmp.w sl, #400 ; 0x190
80101198: bf28 it cs
8010119a: f04f 0a00 movcs.w sl, #0
8010119e: f3af 8014 nop.w {20}
801011a2: f2af 1ea2 subw lr, pc, #418 ; 0x1a2
To fix this, add a new symbol name which doesn't have ENDPROC used on it
and use that with badr. We can't remove the badr usage since that would
would cause breakage with older binutils.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
When doing skey emulation for huge guests, we now need to fault in
pmds, as we don't have PGSTES anymore to store them when we do not
have valid table entries.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Storage keys for guests with huge page mappings have to be managed in
hardware. There are no PGSTEs for PMDs that we could use to retain the
guests's logical view of the key.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Similarly to the pte skey handling, where we set the storage key to
the default key for each newly mapped pte, we have to also do that for
huge pmds.
With the PG_arch_1 flag we keep track if the area has already been
cleared of its skeys.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When a guest starts using storage keys, we trap and set a default one
for its whole valid address space. With this patch we are now able to
do that for large pages.
To speed up the storage key insertion, we use
__storage_key_init_range, which in-turn will use sske_frame to set
multiple storage keys with one instruction. As it has been previously
used for debuging we have to get rid of the default key check and make
it quiescing.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
[replaced page_set_storage_key loop with __storage_key_init_range]
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
To do dirty loging with huge pages, we protect huge pmds in the
gmap. When they are written to, we unprotect them and mark them dirty.
We introduce the function gmap_test_and_clear_dirty_pmd which handles
dirty sync for huge pages.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
If the host invalidates a pmd, we also have to invalidate the
corresponding gmap pmds, as well as flush them from the TLB. This is
necessary, as we don't share the pmd tables between host and guest as
we do with ptes.
The clearing part of these three new functions sets a guest pmd entry
to _SEGMENT_ENTRY_EMPTY, so the guest will fault on it and we will
re-link it.
Flushing the gmap is not necessary in the host's lazy local and csp
cases. Both purge the TLB completely.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Like for ptes, we also need invalidation notification for pmds, to
make sure the guest lowcore pages are always accessible and later
addition of shadowed pmds.
With PMDs we do not have PGSTEs or some other bits we could use in the
host PMD. Instead we pick one of the free bits in the gmap PMD. Every
time a host pmd will be invalidated, we will check if the respective
gmap PMD has the bit set and in that case fire up the notifier.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Let's allow pmds to be linked into gmap for the upcoming s390 KVM huge
page support.
Before this patch we copied the full userspace pmd entry. This is not
correct, as it contains SW defined bits that might be interpreted
differently in the GMAP context. Now we only copy over all hardware
relevant information leaving out the software bits.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Currently we use the software PGSTE bits PGSTE_IN_BIT and
PGSTE_VSIE_BIT to notify before an invalidation occurs on a prefix
page or a VSIE page respectively. Both bits are pgste specific, but
are used when protecting a memory range.
Let's introduce abstract GMAP_NOTIFY_* bits that will be realized into
the respective bits when gmap DAT table entries are protected.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
This patch reworks the gmap_protect_range logic and extracts the pte
handling into an own function. Also we do now walk to the pmd and make
it accessible in the function for later use. This way we can add huge
page handling logic more easily.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Remove duplicated entry and add missing zero in rate constraints.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix typo in macro TEGRA30_I2S_SLOT_CTRL_TOTAL_SLOTS_MASK.
Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently nft uses inlined variants for common operations
such as 'ip saddr 1.2.3.4' instead of an indirect call.
Also handle meta get operations and lookups without indirect call,
both are builtin.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The enumerated type DM_CCK_Rx_Path_Method is used as a container for
constant definitions, rather then an enumerated type enabling compiler
type checking. To correct this, the variable which uses the constants,
defined by the enumeration, has had its type changed from a u8 to the
enumeration.
Additionally the type has been moved above the structure where the type
is used, to avoid compiler error. The typedef has been removed from the
enumerated type to clear the checkpatch issue with defining new types.
The name of the type has been changed to cck_rx_path_method to clear
the checkpatch issue with CamelCase naming. And the enumerated constant
CCK_Rx_Version_MAX has been removed, since it is never used in code.
The changes are all coding style in nature and so should have no
impact on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The enumerated type dm_dig_cs_ratio_e is never actually used as a type,
but only as a collection of related constants. This is because the
variables, which use the defined constant values, are defined as being
of type u8 rather then tne enumerated type. This omission negates the
possibility of taking advantage of compiler type checking.
To enable the use of compiler type checking of the enumeration the two
variables, (curcs_ratio_state & precs_ratio_state), which use the type's
constants have their types changed from u8 to enum dig_cck_cs_ratio_state.
Additionally the types declaration has been moved above the dig
structure, where the type is used. The 'typedef' keyword has been
removed from the type to clear the checkpatch issue with defining new
types. And the constant DIG_CS_MAX has been removed since this is never
used in the code.
These changes are purely coding style changes and should not impact
on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The enumerated type dm_dig_pd_th_e is never actually used as
the type for the two variables which use the constants, which the
enumeration defines. This omission removes the possibility of taking
advantage of compiler type checking.
To correct this the two member variables, (curpd_thstate & prepd_thstate)
have been changed to use the type enum dig_pkt_detection_threshold rather
then u8.
Additionally the enum's declaration has been moved above the dig
structure, where the type is used, the 'typedef' has been removed to
clear the checkpatch issue with defining new types, and the value
'DIG_PD_MAX' has been removed from the enumeration, since it is never
used in code.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The enumerated type dm_dig_connect_e is only used to group constant
values, as the actual type is never used as the type for the variables
which use the defined constants (cur_connect_state and pre_connect_state).
These two member variables have had there defined types changed to
properly reflect there usage and to permit compiler type checks to be
performed.
In addition the definition of the enumerated type has been moved above
the structure which uses the type. The typedef of the enumerated type
has been removed to clear the checkpatch issue with defining new types
and the enumerated value DIG_CONNECT_MAX has been removed since it is
never used in code.
The resulting changes are all coding style in nature and should not
impact runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The enumerated type dm_dig_dbg_e is never used in code so has simply
been removed from the source code.
this is a coding style change which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
