kybaaz/linux-xiaomi-chiron
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

MMC core:

Browse source 
- Decrease polling rate for erase/trim/discard
  - Allow non-sleeping GPIOs for card detect
  - Improve mmc block removal path
  - Enable support for mmc_sw_reset() for SDIO cards
  - Add mmc_sw_reset() to allow users to do a soft reset of the card
  - Allow power delay to be tunable via DT
  - Allow card detect debounce delay to be tunable via DT
  - Enable new quirk to limit clock rate for Marvell 8887 chip
  - Don't show eMMC RPMB and BOOT areas in /proc/partitions
  - Add capability to avoid 3.3V signaling for fragile HWs
 
 MMC host:
  - Improve/fixup support for handle highmem pages
  - Remove depends on HAS_DMA in case of platform dependency
  - mvsdio: Enable support for erase/trim/discard
  - rtsx_usb: Enable support for erase/trim/discard
  - renesas_sdhi: Fix WP logic regressions
  - renesas_sdhi: Add r8a77965 support
  - renesas_sdhi: Add R8A77980 to whitelist
  - meson: Add optional support for device reset
  - meson: Add support for the Meson-AXG platform
  - dw_mmc: Add new driver for BlueField DW variant
  - mediatek: Add support for 64G DRAM DMA
  - sunxi: Deploy runtime PM support
  - jz4740: Add support for JZ4780
  - jz4740: Enable support for DT based platforms
  - sdhci: Various improvement to timeout handling
  - sdhci: Disable support for HS200/HS400/UHS when no 1.8V support
  - sdhci-omap: Add support for controller in k2g SoC
  - sdhci-omap: Add workarounds for a couple of Erratas
  - sdhci-omap: Enable support for generic sdhci DT properties
  - sdhci-cadence: Re-send tune request to deal with errata
  - sdhci-pci: Fix 3.3V voltage switch for some BYT-based Intel controllers
  - sdhci-pci: Avoid 3.3V signaling on some NI 904x
  - sdhci-esdhc-imx: Use watermark levels for PIO access
  - sdhci-msm: Improve card detection handling
  - sdhci-msm: Add support voltage pad switching
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAlsWMJUXHHVsZi5oYW5z
 c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCkWhw/9GdsKWGAezGYcBC9fBKVbZgvl
 Mu7kTebyQy1N7kbIVD7sBz2ila1O2DhVI9SVS7lVhzFwrG4Hup0szb/mjEQgiOAi
 +S2EjKRD3+9sA612fi1uWY+2cXoQiwCHhFZsCS5deL4pYspebzuYRNO5vZD7QlN8
 vLHZ85yxBtMSiysDUTRm9MH2EXb9j6PfrHnVKj0ih112U/ip4PZVc7zHGBZq9zzy
 6WSUMYBe2d1jajJ6MS3gf5Vrp53mz2OLkxKRCtMgut7YOwLZ8biKVa3G69ruQTm8
 jqrMoNrZnhO3aT/1kassCE4ygoXewMZPhYq8k24PcaihR3o/tVI1dlb4Zz70cBb8
 AGAdmdzu1sDEzY6KkSVTZ5IaxQo9SNANste/O/LfsOxHWkWxBQ6H0EeqMdt+W7of
 A0zGKTQrcTFhxzA9OeX3aZwZhjcipQlf8TWnI5+ayPY/UKwMhvWNCTMQtTJAhqBh
 mS7Uk5qd7OSJZTzVYrfLZ2ZOQKhtMbD9lAza/9Ldy5j5QDscLmxmhLOP0yuKI2Zp
 92N3JPIGzfK4aKGCLKSA3KhYwuwaicwsXqfJV+cPz9fFtNs8WdHqyU+nslD0Oxm4
 v3QZKPJa3LWCezPvWGSSTGLEgOvJtLQtJBefX1Hm6sxLbY12aBgu/iNp5UckGlzW
 7zaWXtH8nzYlBKsXf/8=
 =MwCT
 -----END PGP SIGNATURE-----

Merge tag 'mmc-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Decrease polling rate for erase/trim/discard
   - Allow non-sleeping GPIOs for card detect
   - Improve mmc block removal path
   - Enable support for mmc_sw_reset() for SDIO cards
   - Add mmc_sw_reset() to allow users to do a soft reset of the card
   - Allow power delay to be tunable via DT
   - Allow card detect debounce delay to be tunable via DT
   - Enable new quirk to limit clock rate for Marvell 8887 chip
   - Don't show eMMC RPMB and BOOT areas in /proc/partitions
   - Add capability to avoid 3.3V signaling for fragile HWs

  MMC host:
   - Improve/fixup support for handle highmem pages
   - Remove depends on HAS_DMA in case of platform dependency
   - mvsdio: Enable support for erase/trim/discard
   - rtsx_usb: Enable support for erase/trim/discard
   - renesas_sdhi: Fix WP logic regressions
   - renesas_sdhi: Add r8a77965 support
   - renesas_sdhi: Add R8A77980 to whitelist
   - meson: Add optional support for device reset
   - meson: Add support for the Meson-AXG platform
   - dw_mmc: Add new driver for BlueField DW variant
   - mediatek: Add support for 64G DRAM DMA
   - sunxi: Deploy runtime PM support
   - jz4740: Add support for JZ4780
   - jz4740: Enable support for DT based platforms
   - sdhci: Various improvement to timeout handling
   - sdhci: Disable support for HS200/HS400/UHS when no 1.8V support
   - sdhci-omap: Add support for controller in k2g SoC
   - sdhci-omap: Add workarounds for a couple of Erratas
   - sdhci-omap: Enable support for generic sdhci DT properties
   - sdhci-cadence: Re-send tune request to deal with errata
   - sdhci-pci: Fix 3.3V voltage switch for some BYT-based Intel controllers
   - sdhci-pci: Avoid 3.3V signaling on some NI 904x
   - sdhci-esdhc-imx: Use watermark levels for PIO access
   - sdhci-msm: Improve card detection handling
   - sdhci-msm: Add support voltage pad switching"

* tag 'mmc-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (104 commits)
  mmc: renesas_sdhi: really fix WP logic regressions
  mmc: mvsdio: Enable MMC_CAP_ERASE
  mmc: mvsdio: Respect card busy time out from mmc core
  mmc: sdhci-msm: Remove NO_CARD_NO_RESET quirk
  mmc: sunxi: Use ifdef rather than __maybe_unused
  mmc: mxmmc: Use ifdef rather than __maybe_unused
  mmc: mxmmc: include linux/highmem.h
  mmc: sunxi: mark PM functions as __maybe_unused
  mmc: Throttle calls to MMC_SEND_STATUS during mmc_do_erase()
  mmc: au1xmmc: handle highmem pages
  mmc: Allow non-sleeping GPIO cd
  mmc: sdhci-*: Don't emit error msg if sdhci_add_host() fails
  mmc: sd: Define name for default speed dtr
  mmc: core: Move calls to ->prepare_hs400_tuning() closer to mmc code
  mmc: sdhci-xenon: use match_string() helper
  mmc: wbsd: handle highmem pages
  mmc: ushc: handle highmem pages
  mmc: mxcmmc: handle highmem pages
  mmc: atmel-mci: use sg_copy_{from,to}_buffer
  mmc: android-goldfish: use sg_copy_{from,to}_buffer
  ...
This commit is contained in:
Linus Torvalds 2018-06-05 16:11:43 -07:00
commit f60342fac9
66 changed files with 1381 additions and 430 deletions
Download patch file Download diff file Expand all files Collapse all files

2
include/linux/mmc/card.h
View file

@ -156,6 +156,7 @@ struct sd_switch_caps {
#define UHS_DDR50_MAX_DTR 50000000
#define UHS_SDR25_MAX_DTR UHS_DDR50_MAX_DTR
#define UHS_SDR12_MAX_DTR 25000000
#define DEFAULT_SPEED_MAX_DTR UHS_SDR12_MAX_DTR
unsigned int sd3_bus_mode;
#define UHS_SDR12_BUS_SPEED 0
#define HIGH_SPEED_BUS_SPEED 1
@ -252,6 +253,7 @@ struct mmc_card {
#define MMC_TYPE_SD_COMBO 3 /* SD combo (IO+mem) card */
unsigned int state; /* (our) card state */
unsigned int quirks; /* card quirks */
unsigned int quirk_max_rate; /* max rate set by quirks */
#define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */
#define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */
/* for byte mode */

1
include/linux/mmc/core.h
View file

@ -177,6 +177,7 @@ int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd,
int retries);
int mmc_hw_reset(struct mmc_host *host);
int mmc_sw_reset(struct mmc_host *host);
void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card);
#endif /* LINUX_MMC_CORE_H */

6
include/linux/mmc/host.h
View file

@ -22,6 +22,7 @@
struct mmc_ios {
unsigned int clock; /* clock rate */
unsigned short vdd;
unsigned int power_delay_ms; /* waiting for stable power */
/* vdd stores the bit number of the selected voltage range from below. */
@ -320,6 +321,9 @@ struct mmc_host {
#define MMC_CAP_UHS_SDR50 (1 << 18) /* Host supports UHS SDR50 mode */
#define MMC_CAP_UHS_SDR104 (1 << 19) /* Host supports UHS SDR104 mode */
#define MMC_CAP_UHS_DDR50 (1 << 20) /* Host supports UHS DDR50 mode */
#define MMC_CAP_UHS (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | \
MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | \
MMC_CAP_UHS_DDR50)
/* (1 << 21) is free for reuse */
#define MMC_CAP_DRIVER_TYPE_A (1 << 23) /* Host supports Driver Type A */
#define MMC_CAP_DRIVER_TYPE_C (1 << 24) /* Host supports Driver Type C */
@ -345,6 +349,7 @@ struct mmc_host {
#define MMC_CAP2_HS400_1_2V (1 << 16) /* Can support HS400 1.2V */
#define MMC_CAP2_HS400 (MMC_CAP2_HS400_1_8V | \
MMC_CAP2_HS400_1_2V)
#define MMC_CAP2_HSX00_1_8V (MMC_CAP2_HS200_1_8V_SDR | MMC_CAP2_HS400_1_8V)
#define MMC_CAP2_HSX00_1_2V (MMC_CAP2_HS200_1_2V_SDR | MMC_CAP2_HS400_1_2V)
#define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17)
#define MMC_CAP2_NO_WRITE_PROTECT (1 << 18) /* No physical write protect pin, assume that card is always read-write */
@ -354,6 +359,7 @@ struct mmc_host {
#define MMC_CAP2_NO_MMC (1 << 22) /* Do not send (e)MMC commands during initialization */
#define MMC_CAP2_CQE (1 << 23) /* Has eMMC command queue engine */
#define MMC_CAP2_CQE_DCMD (1 << 24) /* CQE can issue a direct command */
#define MMC_CAP2_AVOID_3_3V (1 << 25) /* Host must negotiate down from 3.3V */
int fixed_drv_type; /* fixed driver type for non-removable media */

1
include/linux/mmc/sdio_ids.h
View file

@ -55,6 +55,7 @@
#define SDIO_DEVICE_ID_MARVELL_8688WLAN 0x9104
#define SDIO_DEVICE_ID_MARVELL_8688BT 0x9105
#define SDIO_DEVICE_ID_MARVELL_8797_F0 0x9128
#define SDIO_DEVICE_ID_MARVELL_8887WLAN 0x9134
#define SDIO_VENDOR_ID_SIANO 0x039a
#define SDIO_DEVICE_ID_SIANO_NOVA_B0 0x0201