sound updates for 5.11-rc1

Lots of changes (slightly more code increase than usual) at this
 time, while most of code changes are ASoC driver-specific.
 Here goes some highlight:
 
 Core:
 * The new auxiliary bus implementation for Intel DSP, which will
   be used by other drivers as well
 * Lots of ASoC core cleanups and refactoring
 * UBSAN and KCSAN fixes in rawmidi, sequencer and a few others
 * Compress-offload API enhancement for the pause during draining
 
 HD- and USB-audio:
 * Enhancements of the USB-audio implicit feedback support,
   including better full-duplex operations
 * Continued CA0132 improvements and fixes
 * A few new quirk entries, HDMI audio fixes
 
 ASoC:
 * Support for boot time selection of Intel DSP firmware, which
   should help distros/users testing new stuff more easily;
   the kconfig was moved to boot time option, too
 * Some basic DPCM support in audio graph card
 * Removal of old pre-DT Freescale drivers
 * Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
   Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek
   RT715, Qualcomm SM8250 and simple GPIO based muxes
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAl/YhGcOHHRpd2FpQHN1
 c2UuZGUACgkQLtJE4w1nLE8O1RAAhuRnJZXDXOPXIG9OchsYlHI3wK4eaSiyNe+i
 sI5yoAdLFYBxBY3OQ4kQCvhjzlLziUvfIfv5YZZMGGAxx9rxsb73F1zH4ttFi1qA
 6ipbhk7SVgK3AQk74lWB2JRYrdBko8Y3z9HKNVqaXWnTubyV4EinoC4hzNLuNDI9
 JsgyrsCL5Bzl9rlD3vs5mwPwIfiD4hw1KKSQa9f1qnOtXCcbRtL3T4iZZsF5sIph
 veKrS0R1MZmXpMQoyhyMnTls1GvmW5N3mhIgw9rR1PgeVof8q8klKd2WfroKKz6s
 Dek3IrgPXfvTdr2ZjNxI29x4NItIayGkbe1DFLZcHQ08yn9JrP9EKQ3Gnv7S9pVT
 2gIdSOZV4XYA4OF04ubNU1Ve0n5kP4pX/LvN+cuSgyfgCE+V6HsvTF5nVyrunrM/
 0bdjdWrc1dkb59GuLGOxI0M68lou7J14ZjCzeevuuQm9dNN5x62LDf3+0vDTFBEs
 t9DaqoqUMZKFfaMLWG8UK04kvw3rhAHap+tQ9HOpz86VK6Qy54RBSfv43p2UK1SO
 TDHRYIQxQ1GfPlHEy6XFfKOPw15VPDMJWoMPzFfoB+C6dzNKKSAgivFPnERsw88X
 9T81MeLhCqqTdRLlZPnGM3S6L1btZhkZcLvyusT0WGGVg8KLgSmn4OwY2wITDebM
 zIUgHTM=
 =j9El
 -----END PGP SIGNATURE-----

Merge tag 'sound-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "Lots of changes (slightly more code increase than usual) at this time,
  while most of code changes are ASoC driver-specific.

  Here are some highlights:

  Core:

   - The new auxiliary bus implementation for Intel DSP, which will be
     used by other drivers as well

   - Lots of ASoC core cleanups and refactoring

   - UBSAN and KCSAN fixes in rawmidi, sequencer and a few others

   - Compress-offload API enhancement for the pause during draining

  HD- and USB-audio:

   - Enhancements of the USB-audio implicit feedback support, including
     better full-duplex operations

   - Continued CA0132 improvements and fixes

   - A few new quirk entries, HDMI audio fixes

  ASoC:

   - Support for boot time selection of Intel DSP firmware, which should
     help distros/users testing new stuff more easily; the kconfig was
     moved to boot time option, too

   - Some basic DPCM support in audio graph card

   - Removal of old pre-DT Freescale drivers

   - Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
     Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek
     RT715, Qualcomm SM8250 and simple GPIO based muxes"

* tag 'sound-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (445 commits)
  ALSA: pcm: oss: Fix potential out-of-bounds shift
  ALSA: usb-audio: Fix potential out-of-bounds shift
  ALSA: hda/ca0132 - Add ZxR surround DAC setup.
  ALSA: hda/ca0132 - Add 8051 PLL write helper functions.
  ALSA: hda/hdmi: packet buffer index must be set before reading value
  ASoC: SOF: imx: update kernel-doc description
  ASoC: mediatek: mt8183: delete some unreachable code
  ASoC: mediatek: mt8183: add PM ops to machine drivers
  ASoC: topology: Fix wrong size check
  ASoC: topology: Add missing size check
  ASoC: SOF: Intel: hda: fix the condition passed to sof_dev_dbg_or_err
  ASoC: SOF: modify the SOF_DBG flags
  ASoC: SOF: Intel: hda: remove duplicated status dump
  ASoC: rt1015p: delay 300ms after SDB pulling high for calibration
  ASoC: rt1015p: move SDB control from trigger to DAPM
  ASoC: wm_adsp: remove "ctl" from list on error in wm_adsp_create_control()
  ALSA: usb-audio: Fix control 'access overflow' errors from chmap
  ALSA: hda/hdmi: always print pin NIDs as hexadecimal
  ALSA: hda/realtek - Add supported for more Lenovo ALC285 Headset Button
  ALSA: hda/ca0132 - Remove now unnecessary DSP setup functions.
  ...

include/linux/platform_data/adau1977.h

@@ -1,44 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * ADAU1977/ADAU1978/ADAU1979 driver
- *
- * Copyright 2014 Analog Devices Inc.
- *  Author: Lars-Peter Clausen <lars@metafoo.de>
- */
-
-#ifndef __LINUX_PLATFORM_DATA_ADAU1977_H__
-#define __LINUX_PLATFORM_DATA_ADAU1977_H__
-
-/**
- * enum adau1977_micbias - ADAU1977 MICBIAS pin voltage setting
- * @ADAU1977_MICBIAS_5V0: MICBIAS is set to 5.0 V
- * @ADAU1977_MICBIAS_5V5: MICBIAS is set to 5.5 V
- * @ADAU1977_MICBIAS_6V0: MICBIAS is set to 6.0 V
- * @ADAU1977_MICBIAS_6V5: MICBIAS is set to 6.5 V
- * @ADAU1977_MICBIAS_7V0: MICBIAS is set to 7.0 V
- * @ADAU1977_MICBIAS_7V5: MICBIAS is set to 7.5 V
- * @ADAU1977_MICBIAS_8V0: MICBIAS is set to 8.0 V
- * @ADAU1977_MICBIAS_8V5: MICBIAS is set to 8.5 V
- * @ADAU1977_MICBIAS_9V0: MICBIAS is set to 9.0 V
- */
-enum adau1977_micbias {
-	ADAU1977_MICBIAS_5V0 = 0x0,
-	ADAU1977_MICBIAS_5V5 = 0x1,
-	ADAU1977_MICBIAS_6V0 = 0x2,
-	ADAU1977_MICBIAS_6V5 = 0x3,
-	ADAU1977_MICBIAS_7V0 = 0x4,
-	ADAU1977_MICBIAS_7V5 = 0x5,
-	ADAU1977_MICBIAS_8V0 = 0x6,
-	ADAU1977_MICBIAS_8V5 = 0x7,
-	ADAU1977_MICBIAS_9V0 = 0x8,
-};
-
-/**
- * struct adau1977_platform_data - Platform configuration data for the ADAU1977
- * @micbias: Specifies the voltage for the MICBIAS pin
- */
-struct adau1977_platform_data {
-	enum adau1977_micbias micbias;
-};
-
-#endif