kybaaz/linux-xiaomi-chiron
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

spi: Updates for v5.12

Browse source 
The main focus of this release from a framework point of view has been
 spi-mem where we've acquired support for a few new hardware features
 which enable better performance on suitable hardware.  Otherwise mostly
 thanks to Arnd's cleanup efforts on old platforms we've removed several
 obsolete drivers which just about balance out the newer drivers we've
 added this cycle.
 
  - Allow drivers to flag if they are unidirectional.
  - Support for DTR mode and hardware acceleration of dummy cycles in spi-mem.
  - Support for Allwinder H616, Intel Lightning Mountain, nVidia Tegra
    QuadSPI, Realtek RTL838x and RTL839x.
  - Removal of obsolute EFM32, Txx9 and SIRF Prima and Atlas drivers.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmAq3M0ACgkQJNaLcl1U
 h9Aq3gf6AuboDwFguKZAmXp27zjYsv5o5KtPyycTltIIfjGuA58+fN2zQT+puoGI
 wzafjk9R73Foa67YKUwClaBGZNZbYOkB2iOk9a+/sku6k3jO14moybpMuL32dCVe
 lutKd9D4n8/J5UHX3SHKHAZ9r2vp28rlaZa4wd79Ww5r+BLajUcrkjtr4GVT5k1k
 WzzC0nUjE/zg1oV+PlakMolwK+iBCQYTT7S4r/OQAABQIkXXdtwmGvFUUXpGVF19
 GUs52XI8QzK5504Xl+F7NF1+2zHovO11PTHnd+rAe6AfA/NGggtk6O1Y9R4tQHF9
 TN6PHukNxUdTFfe6RTbSzPagpFydvQ==
 =/4Ve
 -----END PGP SIGNATURE-----

Merge tag 'spi-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "The main focus of this release from a framework point of view has been
  spi-mem where we've acquired support for a few new hardware features
  which enable better performance on suitable hardware.

  Otherwise mostly thanks to Arnd's cleanup efforts on old platforms
  we've removed several obsolete drivers which just about balance out
  the newer drivers we've added this cycle.

  Summary:

   - Allow drivers to flag if they are unidirectional.

   - Support for DTR mode and hardware acceleration of dummy cycles in
     spi-mem.

   - Support for Allwinder H616, Intel Lightning Mountain, nVidia Tegra
     QuadSPI, Realtek RTL838x and RTL839x.

   - Removal of obsolete EFM32, Txx9 and SIRF Prima and Atlas drivers"

* tag 'spi-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (76 commits)
  spi: Skip zero-length transfers in spi_transfer_one_message()
  spi: dw: Avoid stack content exposure
  spi: cadence-quadspi: Use spi_mem_dtr_supports_op()
  spi: spi-mem: add spi_mem_dtr_supports_op()
  spi: atmel-quadspi: Disable the QSPI IP at suspend()
  spi: pxa2xx: Add IDs for the controllers found on Intel Lynxpoint
  spi: pxa2xx: Fix the controller numbering for Wildcat Point
  spi: Change provied to provided in the file spi.h
  spi: mediatek: add set_cs_timing support
  spi: support CS timing for HW & SW mode
  spi: add power control when set_cs_timing
  spi: stm32: make spurious and overrun interrupts visible
  spi: stm32h7: replace private SPI_1HZ_NS with NSEC_PER_SEC
  spi: stm32: defer probe for reset
  spi: stm32: driver uses reset controller only at init
  spi: stm32h7: ensure message are smaller than max size
  spi: stm32: use bitfield macros
  spi: stm32: do not mandate cs_gpio
  spi: stm32: properly handle 0 byte transfer
  spi: clps711xx: remove redundant white-space
  ...
This commit is contained in:
Linus Torvalds 2021-02-22 09:19:08 -08:00
commit a2590d6989
45 changed files with 2518 additions and 2544 deletions
Download patch file Download diff file Expand all files Collapse all files

15
include/linux/platform_data/efm32-spi.h
View file

@ -1,15 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __LINUX_PLATFORM_DATA_EFM32_SPI_H__
#define __LINUX_PLATFORM_DATA_EFM32_SPI_H__
#include <linux/types.h>
/**
* struct efm32_spi_pdata
* @location: pinmux location for the I/O pins (to be written to the ROUTE
* register)
*/
struct efm32_spi_pdata {
u8 location;
};
#endif /* ifndef __LINUX_PLATFORM_DATA_EFM32_SPI_H__ */

9
include/linux/spi/spi-mem.h
View file

@ -311,6 +311,9 @@ void spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr,
bool spi_mem_default_supports_op(struct spi_mem *mem,
const struct spi_mem_op *op);
bool spi_mem_dtr_supports_op(struct spi_mem *mem,
const struct spi_mem_op *op);
#else
static inline int
spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr,
@ -334,6 +337,12 @@ bool spi_mem_default_supports_op(struct spi_mem *mem,
return false;
}
static inline
bool spi_mem_dtr_supports_op(struct spi_mem *mem,
const struct spi_mem_op *op)
{
return false;
}
#endif /* CONFIG_SPI_MEM */
int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op);

44
include/linux/spi/spi.h
View file

@ -6,6 +6,7 @@
#ifndef __LINUX_SPI_H
#define __LINUX_SPI_H
#include <linux/bits.h>
#include <linux/device.h>
#include <linux/mod_devicetable.h>
#include <linux/slab.h>
@ -15,6 +16,8 @@
#include <linux/gpio/consumer.h>
#include <linux/ptp_clock_kernel.h>
#include <uapi/linux/spi/spi.h>
struct dma_chan;
struct property_entry;
struct spi_controller;
@ -164,28 +167,19 @@ struct spi_device {
u8 chip_select;
u8 bits_per_word;
bool rt;
#define SPI_NO_TX BIT(31) /* no transmit wire */
#define SPI_NO_RX BIT(30) /* no receive wire */
/*
* All bits defined above should be covered by SPI_MODE_KERNEL_MASK.
* The SPI_MODE_KERNEL_MASK has the SPI_MODE_USER_MASK counterpart,
* which is defined in 'include/uapi/linux/spi/spi.h'.
* The bits defined here are from bit 31 downwards, while in
* SPI_MODE_USER_MASK are from 0 upwards.
* These bits must not overlap. A static assert check should make sure of that.
* If adding extra bits, make sure to decrease the bit index below as well.
*/
#define SPI_MODE_KERNEL_MASK (~(BIT(30) - 1))
u32 mode;
#define SPI_CPHA 0x01 /* clock phase */
#define SPI_CPOL 0x02 /* clock polarity */
#define SPI_MODE_0 (0|0) /* (original MicroWire) */
#define SPI_MODE_1 (0|SPI_CPHA)
#define SPI_MODE_2 (SPI_CPOL|0)
#define SPI_MODE_3 (SPI_CPOL|SPI_CPHA)
#define SPI_MODE_X_MASK (SPI_CPOL|SPI_CPHA)
#define SPI_CS_HIGH 0x04 /* chipselect active high? */
#define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */
#define SPI_3WIRE 0x10 /* SI/SO signals shared */
#define SPI_LOOP 0x20 /* loopback mode */
#define SPI_NO_CS 0x40 /* 1 dev/bus, no chipselect */
#define SPI_READY 0x80 /* slave pulls low to pause */
#define SPI_TX_DUAL 0x100 /* transmit with 2 wires */
#define SPI_TX_QUAD 0x200 /* transmit with 4 wires */
#define SPI_RX_DUAL 0x400 /* receive with 2 wires */
#define SPI_RX_QUAD 0x800 /* receive with 4 wires */
#define SPI_CS_WORD 0x1000 /* toggle cs after each word */
#define SPI_TX_OCTAL 0x2000 /* transmit with 8 wires */
#define SPI_RX_OCTAL 0x4000 /* receive with 8 wires */
#define SPI_3WIRE_HIZ 0x8000 /* high impedance turnaround */
int irq;
void *controller_state;
void *controller_data;
@ -208,6 +202,10 @@ struct spi_device {
*/
};
/* Make sure that SPI_MODE_KERNEL_MASK & SPI_MODE_USER_MASK don't overlap */
static_assert((SPI_MODE_KERNEL_MASK & SPI_MODE_USER_MASK) == 0,
"SPI_MODE_USER_MASK & SPI_MODE_KERNEL_MASK must not overlap");
static inline struct spi_device *to_spi_device(struct device *dev)
{
return dev ? container_of(dev, struct spi_device, dev) : NULL;
@ -624,7 +622,7 @@ struct spi_controller {
/*
* These hooks are for drivers that use a generic implementation
* of transfer_one_message() provied by the core.
* of transfer_one_message() provided by the core.
*/
void (*set_cs)(struct spi_device *spi, bool enable);
int (*transfer_one)(struct spi_controller *ctlr, struct spi_device *spi,
@ -827,6 +825,7 @@ extern void spi_res_release(struct spi_controller *ctlr,
* transfer. If 0 the default (from @spi_device) is used.
* @bits_per_word: select a bits_per_word other than the device default
* for this transfer. If 0 the default (from @spi_device) is used.
* @dummy_data: indicates transfer is dummy bytes transfer.
* @cs_change: affects chipselect after this transfer completes
* @cs_change_delay: delay between cs deassert and assert when
* @cs_change is set and @spi_transfer is not the last in @spi_message
@ -939,6 +938,7 @@ struct spi_transfer {
struct sg_table tx_sg;
struct sg_table rx_sg;
unsigned dummy_data:1;
unsigned cs_change:1;
unsigned tx_nbits:3;
unsigned rx_nbits:3;