mfd: wcd9335: Add support to wcd9335 codec
Qualcomm WCD9335 Codec is a standalone Hi-Fi audio codec IC.
This codec has integrated SoundWire controller, pin controller and
interrupt controller.
Originally from: d95b982a
This commit is contained in:
Jami Kettunen
parent
bb2e9f85ca
commit
9b9b840ec1
3 changed files with 313 additions and 0 deletions
|
|
@ -2099,6 +2099,18 @@ config MFD_WCD934X
|
|||
This driver provides common support WCD934x audio codec and its
|
||||
associated Pin Controller, Soundwire Controller and Audio codec.
|
||||
|
||||
config MFD_WCD9335
|
||||
tristate "Support for WCD9335 Codec"
|
||||
depends on SLIMBUS
|
||||
select REGMAP
|
||||
select REGMAP_SLIMBUS
|
||||
select REGMAP_IRQ
|
||||
select MFD_CORE
|
||||
help
|
||||
Support for the Qualcomm WCD9335 Codec.
|
||||
This driver provides common support WCD9335 audio codec and its
|
||||
associated Pin Controller, Soundwire Controller and Audio codec.
|
||||
|
||||
config MFD_ATC260X
|
||||
tristate
|
||||
select MFD_CORE
|
||||
|
|
|
|||
|
|
@ -61,6 +61,7 @@ ifeq ($(CONFIG_MFD_CS47L24),y)
|
|||
arizona-objs += cs47l24-tables.o
|
||||
endif
|
||||
obj-$(CONFIG_MFD_WCD934X) += wcd934x.o
|
||||
obj-$(CONFIG_MFD_WCD9335) += wcd9335.o
|
||||
obj-$(CONFIG_MFD_WM8400) += wm8400-core.o
|
||||
wm831x-objs := wm831x-core.o wm831x-irq.o wm831x-otp.o
|
||||
wm831x-objs += wm831x-auxadc.o
|
||||
|
|
|
|||
300
drivers/mfd/wcd9335.c
Normal file
300
drivers/mfd/wcd9335.c
Normal file
|
|
@ -0,0 +1,300 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
// Copyright (c) 2019, Linaro Limited
|
||||
|
||||
#include <linux/clk.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/mfd/core.h>
|
||||
#include <linux/mfd/wcd9335/registers.h>
|
||||
#include <linux/mfd/wcd9335/wcd9335.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_irq.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/regulator/consumer.h>
|
||||
#include <linux/slimbus.h>
|
||||
|
||||
#define WCD9335_REGMAP_IRQ_REG(_irq, _off, _mask) \
|
||||
[_irq] = { \
|
||||
.reg_offset = (_off), \
|
||||
.mask = (_mask), \
|
||||
.type = { \
|
||||
.type_reg_offset = (_off), \
|
||||
.types_supported = IRQ_TYPE_EDGE_BOTH, \
|
||||
.type_reg_mask = (_mask), \
|
||||
.type_level_low_val = (_mask), \
|
||||
.type_level_high_val = (_mask), \
|
||||
.type_falling_val = 0, \
|
||||
.type_rising_val = 0, \
|
||||
}, \
|
||||
}
|
||||
|
||||
static const struct mfd_cell wcd9335_devices[] = {
|
||||
{
|
||||
.name = "wcd9335-codec",
|
||||
}, {
|
||||
.name = "wcd9335-gpio",
|
||||
.of_compatible = "qcom,wcd9340-gpio",
|
||||
}, {
|
||||
.name = "wcd9335-soundwire",
|
||||
.of_compatible = "qcom,soundwire-v1.3.0",
|
||||
},
|
||||
};
|
||||
|
||||
static const struct regmap_irq wcd9335_irqs[] = {
|
||||
WCD9335_REGMAP_IRQ_REG(WCD9335_IRQ_SLIMBUS, 0, BIT(0)),
|
||||
WCD9335_REGMAP_IRQ_REG(WCD9335_IRQ_HPH_PA_OCPL_FAULT, 0, BIT(2)),
|
||||
WCD9335_REGMAP_IRQ_REG(WCD9335_IRQ_HPH_PA_OCPR_FAULT, 0, BIT(3)),
|
||||
WCD9335_REGMAP_IRQ_REG(WCD9335_IRQ_MBHC_SW_DET, 1, BIT(0)),
|
||||
WCD9335_REGMAP_IRQ_REG(WCD9335_IRQ_MBHC_ELECT_INS_REM_DET, 1, BIT(1)),
|
||||
WCD9335_REGMAP_IRQ_REG(WCD9335_IRQ_MBHC_BUTTON_PRESS_DET, 1, BIT(2)),
|
||||
WCD9335_REGMAP_IRQ_REG(WCD9335_IRQ_MBHC_BUTTON_RELEASE_DET, 1, BIT(3)),
|
||||
WCD9335_REGMAP_IRQ_REG(WCD9335_IRQ_MBHC_ELECT_INS_REM_LEG_DET, 1, BIT(4)),
|
||||
WCD9335_REGMAP_IRQ_REG(WCD9335_IRQ_SOUNDWIRE, 2, BIT(4)),
|
||||
};
|
||||
|
||||
static const struct regmap_irq_chip wcd9335_regmap_irq_chip = {
|
||||
.name = "wcd9335_irq",
|
||||
.status_base = WCD9335_INTR_PIN1_STATUS0,
|
||||
.mask_base = WCD9335_INTR_PIN1_MASK0,
|
||||
.ack_base = WCD9335_INTR_PIN1_CLEAR0,
|
||||
.type_base = WCD9335_INTR_LEVEL0,
|
||||
.num_type_reg = 4,
|
||||
.type_in_mask = false,
|
||||
.num_regs = 4,
|
||||
.irqs = wcd9335_irqs,
|
||||
.num_irqs = ARRAY_SIZE(wcd9335_irqs),
|
||||
};
|
||||
|
||||
static bool wcd9335_is_volatile_register(struct device *dev, unsigned int reg)
|
||||
{
|
||||
switch (reg) {
|
||||
case WCD9335_INTR_PIN1_STATUS0...WCD9335_INTR_PIN2_CLEAR3:
|
||||
case WCD9335_SWR_AHB_BRIDGE_RD_DATA_0:
|
||||
case WCD9335_SWR_AHB_BRIDGE_RD_DATA_1:
|
||||
case WCD9335_SWR_AHB_BRIDGE_RD_DATA_2:
|
||||
case WCD9335_SWR_AHB_BRIDGE_RD_DATA_3:
|
||||
case WCD9335_SWR_AHB_BRIDGE_ACCESS_STATUS:
|
||||
case WCD9335_ANA_MBHC_RESULT_3:
|
||||
case WCD9335_ANA_MBHC_RESULT_2:
|
||||
case WCD9335_ANA_MBHC_RESULT_1:
|
||||
case WCD9335_ANA_MBHC_MECH:
|
||||
case WCD9335_ANA_MBHC_ELECT:
|
||||
case WCD9335_ANA_MBHC_ZDET:
|
||||
case WCD9335_ANA_MICB2:
|
||||
case WCD9335_ANA_RCO:
|
||||
case WCD9335_ANA_BIAS:
|
||||
return true;
|
||||
default:
|
||||
return false;
|
||||
}
|
||||
};
|
||||
|
||||
static const struct regmap_range_cfg wcd9335_ranges[] = {
|
||||
{ .name = "WCD9335",
|
||||
.range_min = 0x0,
|
||||
.range_max = WCD9335_MAX_REGISTER,
|
||||
.selector_reg = WCD9335_SEL_REGISTER,
|
||||
.selector_mask = WCD9335_SEL_MASK,
|
||||
.selector_shift = WCD9335_SEL_SHIFT,
|
||||
.window_start = WCD9335_WINDOW_START,
|
||||
.window_len = WCD9335_WINDOW_LENGTH,
|
||||
},
|
||||
};
|
||||
|
||||
static struct regmap_config wcd9335_regmap_config = {
|
||||
.reg_bits = 16,
|
||||
.val_bits = 8,
|
||||
.cache_type = REGCACHE_RBTREE,
|
||||
.max_register = 0xffff,
|
||||
.can_multi_write = true,
|
||||
.ranges = wcd9335_ranges,
|
||||
.num_ranges = ARRAY_SIZE(wcd9335_ranges),
|
||||
.volatile_reg = wcd9335_is_volatile_register,
|
||||
};
|
||||
|
||||
static int wcd9335_bring_up(struct wcd9335_ddata *ddata)
|
||||
{
|
||||
struct regmap *regmap = ddata->regmap;
|
||||
u16 id_minor, id_major;
|
||||
int ret;
|
||||
|
||||
ret = regmap_bulk_read(regmap, WCD9335_CHIP_TIER_CTRL_CHIP_ID_BYTE0,
|
||||
(u8 *)&id_minor, sizeof(u16));
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = regmap_bulk_read(regmap, WCD9335_CHIP_TIER_CTRL_CHIP_ID_BYTE2,
|
||||
(u8 *)&id_major, sizeof(u16));
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
dev_info(ddata->dev, "WCD934x chip id major 0x%x, minor 0x%x\n",
|
||||
id_major, id_minor);
|
||||
|
||||
regmap_write(regmap, WCD9335_CODEC_RPM_RST_CTL, 0x01);
|
||||
regmap_write(regmap, WCD9335_SIDO_NEW_VOUT_A_STARTUP, 0x19);
|
||||
regmap_write(regmap, WCD9335_SIDO_NEW_VOUT_D_STARTUP, 0x15);
|
||||
/* Add 1msec delay for VOUT to settle */
|
||||
usleep_range(1000, 1100);
|
||||
regmap_write(regmap, WCD9335_CODEC_RPM_PWR_CDC_DIG_HM_CTL, 0x5);
|
||||
regmap_write(regmap, WCD9335_CODEC_RPM_PWR_CDC_DIG_HM_CTL, 0x7);
|
||||
regmap_write(regmap, WCD9335_CODEC_RPM_RST_CTL, 0x3);
|
||||
regmap_write(regmap, WCD9335_CODEC_RPM_RST_CTL, 0x7);
|
||||
regmap_write(regmap, WCD9335_CODEC_RPM_PWR_CDC_DIG_HM_CTL, 0x3);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int wcd9335_slim_status_up(struct slim_device *sdev)
|
||||
{
|
||||
struct device *dev = &sdev->dev;
|
||||
struct wcd9335_ddata *ddata;
|
||||
int ret;
|
||||
|
||||
ddata = dev_get_drvdata(dev);
|
||||
|
||||
ddata->regmap = regmap_init_slimbus(sdev, &wcd9335_regmap_config);
|
||||
if (IS_ERR(ddata->regmap)) {
|
||||
dev_err(dev, "Error allocating slim regmap\n");
|
||||
return PTR_ERR(ddata->regmap);
|
||||
}
|
||||
|
||||
ret = wcd9335_bring_up(ddata);
|
||||
if (ret) {
|
||||
dev_err(dev, "Failed to bring up WCD9335: err = %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = devm_regmap_add_irq_chip(dev, ddata->regmap, ddata->irq,
|
||||
IRQF_TRIGGER_HIGH, 0,
|
||||
&wcd9335_regmap_irq_chip,
|
||||
&ddata->irq_data);
|
||||
if (ret) {
|
||||
dev_err(dev, "Failed to add IRQ chip: err = %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = mfd_add_devices(dev, PLATFORM_DEVID_AUTO, wcd9335_devices,
|
||||
ARRAY_SIZE(wcd9335_devices), NULL, 0, NULL);
|
||||
if (ret) {
|
||||
dev_err(dev, "Failed to add child devices: err = %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int wcd9335_slim_status(struct slim_device *sdev,
|
||||
enum slim_device_status status)
|
||||
{
|
||||
switch (status) {
|
||||
case SLIM_DEVICE_STATUS_UP:
|
||||
return wcd9335_slim_status_up(sdev);
|
||||
case SLIM_DEVICE_STATUS_DOWN:
|
||||
mfd_remove_devices(&sdev->dev);
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int wcd9335_slim_probe(struct slim_device *sdev)
|
||||
{
|
||||
struct device *dev = &sdev->dev;
|
||||
struct device_node *np = dev->of_node;
|
||||
struct wcd9335_ddata *ddata;
|
||||
int reset_gpio, ret;
|
||||
|
||||
ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
|
||||
if (!ddata)
|
||||
return -ENOMEM;
|
||||
|
||||
ddata->irq = of_irq_get(np, 0);
|
||||
if (ddata->irq < 0)
|
||||
return dev_err_probe(ddata->dev, ddata->irq,
|
||||
"Failed to get IRQ\n");
|
||||
|
||||
reset_gpio = of_get_named_gpio(np, "reset-gpios", 0);
|
||||
if (reset_gpio < 0) {
|
||||
dev_err(dev, "Failed to get reset gpio: err = %d\n",
|
||||
reset_gpio);
|
||||
return reset_gpio;
|
||||
}
|
||||
|
||||
ddata->extclk = devm_clk_get(dev, "extclk");
|
||||
if (IS_ERR(ddata->extclk)) {
|
||||
dev_err(dev, "Failed to get extclk");
|
||||
return PTR_ERR(ddata->extclk);
|
||||
}
|
||||
|
||||
ddata->supplies[0].supply = "vdd-buck";
|
||||
ddata->supplies[1].supply = "vdd-buck-sido";
|
||||
ddata->supplies[2].supply = "vdd-tx";
|
||||
ddata->supplies[3].supply = "vdd-rx";
|
||||
ddata->supplies[4].supply = "vdd-io";
|
||||
|
||||
ret = regulator_bulk_get(dev, WCD9335_MAX_SUPPLY, ddata->supplies);
|
||||
if (ret) {
|
||||
dev_err(dev, "Failed to get supplies: err = %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = regulator_bulk_enable(WCD9335_MAX_SUPPLY, ddata->supplies);
|
||||
if (ret) {
|
||||
dev_err(dev, "Failed to enable supplies: err = %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* For WCD9335, it takes about 600us for the Vout_A and
|
||||
* Vout_D to be ready after BUCK_SIDO is powered up.
|
||||
* SYS_RST_N shouldn't be pulled high during this time
|
||||
*/
|
||||
usleep_range(600, 650);
|
||||
gpio_direction_output(reset_gpio, 0);
|
||||
msleep(20);
|
||||
gpio_set_value(reset_gpio, 1);
|
||||
msleep(20);
|
||||
|
||||
ddata->dev = dev;
|
||||
dev_set_drvdata(dev, ddata);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void wcd9335_slim_remove(struct slim_device *sdev)
|
||||
{
|
||||
struct wcd9335_ddata *ddata = dev_get_drvdata(&sdev->dev);
|
||||
|
||||
regulator_bulk_disable(WCD9335_MAX_SUPPLY, ddata->supplies);
|
||||
mfd_remove_devices(&sdev->dev);
|
||||
}
|
||||
|
||||
static const struct slim_device_id wcd9335_slim_id[] = {
|
||||
{ SLIM_MANF_ID_QCOM, SLIM_PROD_CODE_WCD9340,
|
||||
SLIM_DEV_IDX_WCD9340, SLIM_DEV_INSTANCE_ID_WCD9340 },
|
||||
{}
|
||||
};
|
||||
|
||||
static struct slim_driver wcd9335_slim_driver = {
|
||||
.driver = {
|
||||
.name = "wcd9335-slim",
|
||||
},
|
||||
.probe = wcd9335_slim_probe,
|
||||
.remove = wcd9335_slim_remove,
|
||||
.device_status = wcd9335_slim_status,
|
||||
.id_table = wcd9335_slim_id,
|
||||
};
|
||||
|
||||
module_slim_driver(wcd9335_slim_driver);
|
||||
MODULE_DESCRIPTION("WCD9335 slim driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_ALIAS("slim:217:250:*");
|
||||
MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@linaro.org>");
|
||||
Loading…
Add table
Add a link
Reference in a new issue