kybaaz/linux-xiaomi-chiron
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

ARM: dts: enable WLAN for Mecer Xtreme Mini S6

Browse source 
The Mecer Xtreme Mini S6 features a wireless module, based on a
Realtek 8723BS, which provides WLAN and Bluetooth connectivity via
SDIO and UART interfaces respectively.

Define a simple MMC power sequence that declares the GPIO pins
connected to the module's WLAN Disable and Bluetooth Disable pins
as active low reset signals, because both signals must be deasserted
for WLAN radio operation.

Configure the host's SDIO interface for High Speed mode with 1.8v
I/O signalling and IRQ detection over a 4-bit wide bus.

Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Link: https://lore.kernel.org/r/20200406135006.23759-1-justin.swartz@risingedge.co.za
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Justin Swartz 2020-04-06 13:50:04 +00:00 • committed by Heiko Stuebner
parent 439062737b
commit 6067ec2c7f
1 changed files with 16 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

16
arch/arm/boot/dts/rk3229-xms6.dts
View file

@ -39,6 +39,12 @@
};
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>,
<&gpio2 29 GPIO_ACTIVE_LOW>;
};
vcc_host: vcc-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
@ -202,6 +208,16 @@
status = "okay";
};
&sdio {
bus-width = <4>;
cap-sd-highspeed;
cap-sdio-irq;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
vqmmc-supply = <&vccio_1v8>;
status = "okay";
};
&sdmmc {
cap-mmc-highspeed;
disable-wp;